This International Standard is the frame standard introducing the basic group, ISO 11201, ISO 11202, ISO 11203, ISO 11204 and ISO 11205, on the determination of emission sound pressure levels at work stations and other specified positions. It gives guidance for:
— facilitating the writing of noise test codes;
— providing physical explanations of this noise emission quantity compared to other noise quantities (see 4.1 to 4.3);
— comparing the different measurement methods offered by the group (see Table 1);
— facilitating the choice of the most appropriate method(s) in typical practical situations (Clause 6).
This International Standard is largely based on flow charts and tables. Case studies are described.
The guidance given applies to airborne sound only. It is for use in noise testing, in general, and in the preparation of noise test codes, in particular.
A standardized noise test code is intended to select standards from the ISO 11201, ISO 11202, ISO 11203, ISO 11204 and ISO 11205 group, which are the most appropriate to the machinery family it covers, and which give detailed requirements on mounting and operating conditions for the particular family, as well as the location of the work station(s) and other specified positions as prescribed in these International Standards.
The data so obtained can be used for the declaration and verification of emission sound pressure levels, e.g. as specified in ISO 4871.
[3]
Cross References:IEC 60942
ISO 3747
GUM:1995
ISO 9614-3
ISO 3745
ISO 11204:2010
ISO 9614-1
ISO 3743-1
ISO 9614-2
IEC 61672-1
ISO 11201:2010
IEC 61260
ISO 11202:2010
IEC 61043
ISO 3746
ISO/IEC Guide 98-3:2008
ISO 3744
ISO 11205:2003
ISO 11203:1995
ISO 3743-2:2018
ISO 3741
ISO 4871
ISO 12001
ISO 3740
ISO 9612
TR 11690-3
ISO 1996-1
Incorporates the following:Amendment, February 2020
| File Size : | 1
file
, 2.8 MB |
| ISBN(s) : | 9780580949210 |
| Note : | This product is unavailable in Ukraine, Russia, Belarus |
| Number of Pages : | 48 |
| Product Code(s) : | 30344921, 30344921, 30344921 |
| Published : | 02/18/2020 |
