This document describes simplified methods for taking samples of solid biofuels in small scale applications and storages including preparation of sampling plans and reports. The main focus is on storages with a size of ?100 t. This document is applicable to the following solid biofuels:
1) fine (up to about 10 mm nominal top size) and regularly-shaped particulate materials that can be sampled using a scoop or pipe, e.g. sawdust, olive stones and wood pellets;
2) coarse or irregularly-shaped particulate materials (up to 200 mm nominal top size) that can be sampled using a fork or shovel, e.g. wood chips, hog fuel and nut shells;
3) large pieces (above 200 mm nominal top size) which are picked manually (e.g. firewood and briquettes).
This document can also be used for other solid biofuels not listed above if the procedures described in this document are applicable. This document specifies methods to be used, for example, when a sample is to be tested for moisture content, ash content, calorific value, bulk density, mechanical durability, particle size distribution, ash melting behaviour and chemical composition.
Additionally, it describes a method for the reduction of sample size and defines requirements on handling and storage of samples.
Cross References:ISO 14780
ISO 16559
ISO 18134-2
ISO/TS 17225-9
ISO 18135
ISO 3310-2
ISO 17827-1
ISO/TS 17225-8
ISO 17225-7
ISO 17828
ISO 17225-5
ISO 17831-2
ISO 17225-6
ISO 17225-1
ISO 17225-2
ISO 17225-3
ISO 17225-4
All current amendments available at time of purchase are included with the purchase of this document. | File Size : | 1
file
, 1.9 MB |
| ISBN(s) : | 9780580971532 |
| Note : | This product is unavailable in Ukraine, Russia, Belarus |
| Number of Pages : | 28 |
| Product Code(s) : | 30354922, 30354922, 30354922 |
| Published : | 03/11/2020 |
| Same As : | BS EN ISO 21945:2020 |
