BS EN ISO 6145-6:2017 specifies a method for the dynamic preparation of calibration gas mixtures containing
at least two gases (usually one of them is a complementary gas) from pure gases or gas pre-mixtures
using critical flow orifices systems.
The method applies principally to the preparation of mixtures of non-reactive gases that do not react
with any of the materials forming the gas circuit inside the critical flow orifices system or auxiliary
equipment. It has the merit of allowing multi-component mixtures to be prepared as readily as binary
mixtures if an appropriate number of critical flow orifices are used.
By selecting appropriate combinations of critical flow orifices, a dilution ratio of 1 × 104 is achievable.
Although it is more particularly applicable to the preparation of gas mixtures at atmospheric pressure,
the method also offers the possibility of preparing calibration gas mixtures at pressures greater than
atmospheric. The upstream pressure will need to be at least two times higher than downstream
pressure.
The range of flow rates covered by this document extends from 1 ml/min to 10 l/min.
Cross References:ISO 19229:2015 ED1
ISO 6143:2001
ISO 9300:2005(R09) Ed 2
ISO 16664:2004
ISO 7504:2015 ED3
ISO 6145-1:2003 Ed 2
ISO 14912:2003 Ed 1
EIGA 139/10
VDI 3490-16
ISO 6145-7:2009 Ed 2
ISO/IEC GUIDE 98-3:2008 Ed 1
All current amendments available at time of purchase are included with the purchase of this document. | File Size : | 1
file
, 2.3 MB |
| ISBN(s) : | 9780580795725 |
| Note : | This product is unavailable in Ukraine, Russia, Belarus |
| Number of Pages : | 34 |
| Product Code(s) : | 30266429, 30266429, 30266429 |
| Published : | 09/04/2017 |
| Same As : | BS EN ISO 6145-6:2017 |
