BS ISO 10816-4:2009+A1:2017 establishes provisions for evaluating the severity of in-situ, broad-band vibration measured radial (i.e. transverse) to the shaft axis on all main bearing housings or pedestals and in the axial direction on thrust bearings. These are in terms of:
- vibration under normal steady-state operating conditions;
- vibration during other (non-steady-state) conditions when transient changes are taking place, including run up or run down, initial loading and load changes;
- changes in vibration which can occur during normal steady-state operation.
This part of ISO 10816 is applicable to heavy-duty gas turbine sets used in electrical and mechanical drive applications, with fluid-film bearings, outputs greater than 3 MW and an operating speed range under load between 3 000 r/min and 30 000 r/min. This includes gas turbines coupled to other rotating machinery either directly or through a gearbox. In some cases, this part of ISO 10816 is not applicable to the evaluation of the vibration of the coupled equipment (see the list of exclusions in this clause).
Cross References:ISO 7919-4:2009
ISO 20816-1:2016
ISO 20816-2:2017
ISO 13373-1:2002
ISO 3977-3:2004 Ed 2
ISO 2041:2009 Ed 3
ISO 13373-2:2016
ISO 10816-3:2009 Ed 2
ISO 10816-7:2009 Ed 1
ISO 5348:1998 (R04)
ISO 13373-3:2015
ISO 29541:2010 Ed 1
ISO 21940-31:2013 ED1
ISO 21940-12:2016
Incorporates the following:Amendment, November 2017
| File Size : | 1
file
, 2 MB |
| ISBN(s) : | 9780580942884 |
| Note : | This product is unavailable in Russia, Ukraine, Belarus |
| Number of Pages : | 24 |
| Product Code(s) : | 30341597, 30341597, 30341597 |
| Published : | 11/02/2017 |
