BS ISO 17327-1:2018 specifies general requirements for implant coatings, comprising both surface coatings and surface modifications, applied to non-active surgical implants. This document specifies requirements concerned with generic coating properties including chemical and phase compositions, surface texture, coating coverage integrity, dissolvability, coating thickness, adhesion strength, abrasion resistance, porosity and pore size, and surface wettability.
This document is applicable to surface coatings, which are defined as layers of material with any different property than the natural surface of the substrate which are intentionally added to the substrate.
This document is applicable to surface modifications, which are defined as intentional conversion or reconstruction of the surface of the original substrate to form a new surface material consisting of components of the substrate's own material and possibly foreign material and forming a surface layer with different properties.
Since the pertinent properties of a coating and their needed level of characterization are highly dependent on the intended application of the implant, the generic nature of the general requirements in this document is not intended to either override or replace the provisions of application-specific performance standards.
This document is not applicable to surfaces modified by texturing with the exclusive intention to change the roughness of the surface or the strength of the raw material.
This document is not applicable to natively passivated metal surfaces. While this document is applicable to intentionally passivated metal surfaces, well-established materials passivated by conventional techniques, such as nitric acid immersion, are usually non-hazardous and can be described in a very basic manner.
This document is not applicable to implant coatings utilizing viable tissue.
This document is not applicable to laminates, i.e. composite materials made of multiple layers, e.g. vascular prosthesis constructed of different expanded polytetrafluoroethylene layers, except the exposed surface of the laminate, which can be an implant coating (see 3.1, note 2 to entry).
This document is not applicable to coverings, e.g. covered stents.
Cross References:ISO 14630
ISO 10993-18
ISO 25539-1
ISO 13179-1
ASTM F1580
ASTM F1926/F1926M
ISO 4288
ASTM F1377
ASTM F1854
ASTM F2024
ISO 13485
ISO 14243-2
ISO 12417-1
ISO 14242-2
ASTM F1978
ASTM F1044
ISO/TR 14283
ASTM F1147
ISO 14577-4
ISO 25539-2
ISO 14155
ISO/IEC 17025
ASTM C633
ASTM F1160
JIS H 8666
ISO 4287
ASTM F1609
ISO 25539-3
All current amendments available at time of purchase are included with the purchase of this document. | File Size : | 1
file
, 680 KB |
| ISBN(s) : | 9780580761201 |
| Note : | This product is unavailable in Russia, Ukraine, Belarus |
| Number of Pages : | 24 |
| Product Code(s) : | 30250387, 30250387, 30250387 |
| Published : | 02/28/2018 |
| Same As : | BS ISO 17327-1:2018 |
