ISO 13506-1:2024 PDF

ISO 13506-1:2024 PDF

Name:
ISO 13506-1:2024 PDF

Published Date:
06/01/2024

Status:
Active

Description:

Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin

Publisher:
International Organization for Standardization

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$66.9
Need Help?
This document specifies the overall requirements, equipment and calculation methods to provide results that can be used for evaluating the performance of complete garments or protective clothing ensembles exposed to short duration flame engulfment.

This test method establishes a rating system to characterize the thermal protection provided by single-layer and multi-layer garments made of flame resistant materials. The rating is based on the measurement of heat transfer to a full-size manikin exposed to convective and radiant energy in a laboratory simulation of a fire with controlled heat flux, duration and flame distribution. The heat transfer data is summed over a prescribed time to give the total transferred energy. Transferred energy and thermal manikin protection factor (TMPF) assessment methods provide a means to quantify product performance.

The exposure heat flux is limited to a nominal level of 84 kW/m2 and durations of 3 s to 20 s dependant on the risk assessment and expectations from the thermal insulating capability of the garment.

The results obtained apply only to the particular garments or ensembles, as tested, and for the specified conditions of each test, particularly with respect to the heat flux, duration and flame distribution.

This test method covers visual evaluation, observation, inspection and documentation on the overall behaviour of the test specimen(s) before, during and after the exposure. The effects of body position and movement are not addressed in this test method.

The heat flux measurements can also be used to calculate the predicted skin burn injury resulting from the exposure (see ISO 13506-2).

This test method does not simulate high radiant exposures such as those found in arc flash exposures, some types of fire exposures where liquid or solid fuels are involved, nor exposure to nuclear explosions.

NOTE: This test method is complex and requires a high degree of technical expertise in both the test setup and operation. Even minor deviations from the instructions in this test method can lead to significantly different test results.
File Size : 1 file , 3.7 MB
Note : This product is unavailable in Ukraine, Russia, Belarus
Published : 06/01/2024

History

ISO 13506-1:2024
Published Date: 06/01/2024
Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin
$66.9
ISO 13506-1:2017
Published Date: 07/01/2017
Protective clothing against heat and flame - Part 1: Test method for complete garments - Measurement of transferred energy using an instrumented manikin
$66.9
ISO 13506:2008
Published Date: 05/01/2008
Protective clothing against heat and flame - Test method for complete garments - Prediction of burn injury using an instrumented manikin
$41.4

Related products

ISO 13688:2013
Published Date: 07/15/2013
Protective clothing - General requirements
$49.8
ISO 27065:2017
Published Date: 09/01/2017
Protective clothing - Performance requirements for protective clothing worn by operators applying pesticides and for re-entry workers
$37.2
ISO 20471:2013
Published Date: 03/15/2013
High visibility clothing - Test methods and requirements
$49.8
ISO 17491-2:2012
Published Date: 04/15/2012
Protective clothing - Test methods for clothing providing protection against chemicals - Part 2: Determination of resistance to inward leakage of aerosols and gases (inward leakage test)
$37.2

Best-Selling Products

PFI ES11
Published Date: 01/01/1996
Permanent Marking on Piping Materials
PFI ES16
Published Date: 01/01/1985
Access Holes, Bosses and Plugs for Radiographic Inspection of Pipe Welds
PFI ES1
Published Date: 07/01/1995
Internal Machining & Solid Machined Backing Rings for Circumferential Butt Welds
PFI ES20
Published Date: 01/01/1997
Wall Thickness Measurement by Ultrasonic Examination
PFI ES21
Published Date: 01/01/1992
Internal Machining & Fit-Up of GTAW Root Pass Circumferential Butt Welds
PFI ES22
Published Date: 01/01/1995
Recommended Practice for Color Coding of Piping Materials