ISO 16017-2:2003 PDF

ISO 16017-2:2003 PDF

Name:
ISO 16017-2:2003 PDF

Published Date:
05/15/2003

Status:
Active

Description:

Indoor, ambient and workplace air - Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography - Part 2: Diffusive sampling

Publisher:
International Organization for Standardization

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$66.9
Need Help?

ISO 16017-2:2003 gives general guidance for the sampling and analysis of volatile organic compounds (VOCs) in air. It is applicable to indoor, ambient and workplace air.

ISO 16017-2:2003 is applicable to a wide range of VOCs, including hydrocarbons, halogenated hydrocarbons, ester, glycol ethers, ketones and alcohols. A number of sorbents are recommended for the sampling of these VOCs, each sorbent having a different range of applicability. Very polar compounds generally require derivatisation; very low boiling compounds are only partially retained by the sorbents and can only be estimated qualitatively. Semi-volatile compounds are fully retained by the sorbents, but may only be partially recovered.

ISO 16017-2:2003 is applicable to the measurement of airborne vapours of VOCs in a concentration range of approximately 0,002 mg/m3 to 100 mg/m3 individual organic for an exposure time of 8 h, or 0,3 g/m3 to 300 g/m3 individual organic for an exposure time of four weeks.

The upper limit of the useful range is set by the sorptive capacity of the sorbent used and by the linear dynamic range of the gas chromatograph column and detector or by the sample splitting capability of the analytical instrumentation used. The lower limit of the useful range depends on the noise level of the detector and on blank levels of analyte and/or interfering artefacts on the sorbent tubes. Artefacts are typically sub-nanogram for well-conditioned Tenax GR and carbonaceous sorbents, carbonized molecular sieves and pure charcoals; at low nanogram levels for Tenax TA and at 5 ng to 50 ng levels for other porous polymers.


File Size : 1 file , 430 KB
Note : This product is unavailable in Ukraine, Russia, Belarus
Number of Pages : 36
Published : 05/15/2003
Same As : ISO 16017-2:2003

History


Related products

ISO 9169:2006
Published Date: 07/01/2006
Air quality - Definition and determination of performance characteristics of an automatic measuring system
$58.2
ISO 11771:2010
Published Date: 12/15/2010
Air quality - Determination of time-averaged mass emissions and emission factors - General approach
$49.8
ISO 11665-6:2020
Published Date: 01/01/2020
Measurement of radioactivity in the environment - Air: radon-222 - Part 6: Spot measurement methods of the activity concentration
$37.2
ISO 11665-8:2019
Published Date: 12/01/2019
Measurement of radioactivity in the environment - Air: radon-222 - Part 8: Methodologies for initial and additional investigations in buildings
$49.8

Best-Selling Products

CAN/CSA-ISO GUIDE GUIDE 64-98 (R2007)
Published Date: 03/10/2000
Guide for the Inclusion of Environmental Aspects in Product Standards (Adopted ISO GUIDE 64:1997)