ISO 9270:1992 PDF

Name:
ISO 9270:1992 PDF

Published Date:
12/01/1992

Status:
Active

Description:

7/24 tapers for tool shanks for automatic changing - Tapers for spindle noses

Publisher:
International Organization for Standardization

Document status:

Active

Format:

Electronic (PDF)

Delivery time:

10 minutes

Delivery time (for Russian version):

200 business days

SKU:

Specifies the dimensions and tolerances. Conicity tolerances shall conform with the cone angle tolerance grade AT4 specified in ISO 1947.

File Size :	1 file , 260 KB
Note :	This product is unavailable in Ukraine, Russia, Belarus
Number of Pages :	4
Published :	12/01/1992
Same As :	ISO 9270:1992

History

ISO 9270-1:2010

Published Date: 08/15/2010

7/24 taper spindle noses for automatic tool changers - Part 1: Dimensions and designation of spindle noses of forms S and SF

$24.3

ISO 9270:1992

Published Date: 12/01/1992

7/24 tapers for tool shanks for automatic changing - Tapers for spindle noses

$12.9

Related products

ISO 7388-1:2007

Published Date: 08/01/2007

Tool shanks with 7/24 taper for automatic tool changers - Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF

$24.3

ISO 702-2:2007

Published Date: 10/15/2007

Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 2: Camlock type

$24.3

ISO 10649-4:2013

Published Date: 10/15/2013

Cutter arbors with parallel key and tenon drive - Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer

$16.2

ISO 10649-2:2013

Published Date: 10/15/2013

Cutter arbors with parallel key and tenon drive - Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface

$16.2

Best-Selling Products

IEEE/IEC 1249-2013

Published Date: 09/27/2013

IEC/IEEE Guide for Computer-based Control for Hydroelectric Power Plant Automation

$59.1

IEEE/IEC 60076-21-2011

Published Date: 12/11/2011

Power Transformers - Part 21: Standard Requirements, Terminology, and Test Code for Step-Voltage Regulators

$85.8

IEEE/IEC 60214-2-2019

Published Date: 06/14/2019

IEEE/IEC International Standard for TAP-changers --Part 2: Application guidelines

$31.8

IEEE/IEC 60488-1-2004

Published Date: 11/22/2004

IEC/IEEE International Standard - Higher Performance Protocol for the Standard Digital Interface for Programmable Instrumentation - Part 1: General

$117.3

IEEE/IEC 60488-2-2004

Published Date: 05/15/2004

IEC/IEEE International - Standard Digital Interface for Programmable Instrumentation - Part 2: Codes, formats, protocols and common commands

$111.9

IEEE/IEC 60980-344-2020

Published Date: 10/19/2020

IEEE/IEC International Standard - Nuclear facilities - Equipment important to safety - Seismic qualification

$30.3