INTERN CEMS G-5 PART VIII GRADE-82W PDF

This specification covers the as-received liquid and the as-applied dry film property requirements of the paint.

Restricted Chemical Substances

Effective January 1, 2007, all product supplied to the requirements of this specification must comply with the requirements of the CEMS B-50 specification.

APPLICATION

This specification covers a one-component, fast drying, low gloss, waterborne primer ^† . No South Florida exposure requirements are specified.

^† Safety precautions must be observed when using electrostatic spray equipment with waterborne coatings.

Most suitable for acceptance testing

For acceptance testing, a cryptometer requirement per CEMS GT-2A may be used in lieu of the hiding power requirement provided a correlation has been established between results from the specific cryptometer used and the dry film hiding power results per CEMS GT-2B.

This requirement will be waived if the paint is ordered for spray application only and the containers are so marked.

All test designations refer to the latest issue unless otherwise stated.

Paint will be ordered to the viscosity range desired for the particular application.

Final acceptance will be based on the paint meeting the production drying schedule.

Final acceptance will be based on resistance to in-process cleaners and metalworking fluids.