NR NR/L2/RMVP/0200/P512 ISSUE 2 PDF

This module specifies the requirements for the use of powered cutters and saws.

This module describes factors to take into account for site conditions and the documented safe system of work. It provides instruction and guidance on the use of machines before, during and after work.

This module applies to organisations that are involved with any of the following:

a) planning or supplying any powered cutter or saw; and

b) carrying out or controlling operations using powered cutters or saws. See the index of NR/L2/RMVP/0200 for information on which:

a) specific roles this module applies to; and

b) modules that also apply to those roles.

Purpose

The implementation of this module contributes to mitigating the following risks:

a) failure of plant or its control or safety systems;

b) operating error, operational error or equipment misuse;

c) poor site or weather conditions;

d) risk of leakage/ explosion and environmental impact;

e) loss of ability to remotely monitor the condition of rail vehicles;

f) failure of plant;

g) lack of RIDDOR or close call reporting; and

h) lack of continuous improvement, such as, mitigating factors from incidents not being introduced to machine/operating procedures.