ADOPTED_FROM:ISO 15698-1:2012
<p>This part of <std std-id="iso:std:iso:15698:en" type="undated"><std-ref>ISO 15698</std-ref></std> specifies requirements for headed steel bars to be used as reinforcement of concrete structures.</p><p>This part of <std std-id="iso:std:iso:15698:en" type="undated"><std-ref>ISO 15698</std-ref></std> is a product standard and not an application standard. It is intended to cover a large variety of products and also to support the development of new products.</p><p>This part of <std std-id="iso:std:iso:15698:en" type="undated"><std-ref>ISO 15698</std-ref></std> specifies requirements for headed reinforcing bars with heads made of steel. Heads or head-bar connections made using other materials, including metal-filled sleeves, are not covered by this part of <std std-id="iso:std:iso:15698:en" type="undated"><std-ref>ISO 15698</std-ref></std>.</p><p>End anchorages consisting of a steel bar or other steel component positioned orthogonally at the end(s) of a bar and welded on-site to the bar are outside the scope of this part of <std std-id="iso:std:iso:15698:en" type="undated"><std-ref>ISO 15698</std-ref></std>.</p><p>This part of <std std-id="iso:std:iso:15698:en" type="undated"><std-ref>ISO 15698</std-ref></std> is intended to cover products which are manufactured in a continuous production that allows the products to be tested in accordance with a defined testing regime.</p><p>Requirements and testing for headed bars under impact loading are outside the scope of this part of <std std-id="iso:std:iso:15698:en" type="undated"><std-ref>ISO 15698</std-ref></std>.</p>
