This Standard contains minimum requirements for onsite residential and commercial water treatment
systems. Systems may include the following:
—Greywater treatment systems having a rated treatment capacity up to 5,678 L/day (1,500 gal/day).
This applies to onsite residential and commercial treatment systems that treat greywater, those that
treat laundry water from residential laundry facilities, and those that treat bathing water. See 8.1 for
performance testing and evaluation.
—Residential wastewater treatment systems having a rated treatment capacity up to 5,678 L/day
(1,500 gal/day). This applies to onsite residential treatment systems that treat combined wastewater
generated by the occupants of residence(s). A reuse system treating 1,514 L/day (400 gal/day) to 5,678
L/day (1,500 gal/day) shall either be demonstrated to have met the Class I requirements of NSF/ANSI
40, or must meet these requirements during concurrent testing to this Standard. A treatment system
treating less than 1,514 L/day (400 gal/day) is not required to have met the Class I requirements of
NSF/ANSI 40. See 8.2 for performance testing and evaluation.
—Commercial treatment systems ? this applies to onsite commercial treatment systems that treat
combined commercial facility wastewater and commercial facility laundry water of any capacity, and
those treatment systems that treat greywater from commercial facilities with capacities exceeding 5,678
L/day (1,500 gal/day). These systems shall be performance tested and evaluated at the location of the
reuse system installation, using the wastewater generated onsite from the facility serving the treatment
system. See 8.3 for performance testing and evaluation. The key elements of a field evaluation of a
commercial treatment system are described in Annex A.
Management methods and end uses appropriate for the treated effluent discharged from onsite residential
and commercial treatment systems meeting Class R (single family residential) or Class C (multi-family and
commercial facilities) requirements of this Standard include indoor restricted urban water use, such as toilet
and urinal flushing, and outdoor unrestricted urban water use, such as surface irrigation. Effluent quality
criteria consistent with these uses are described in 8.6, Criteria.
This Standard is intended to address public health and environmental issues. Actual performance for any
site or system may vary, depending on variations in raw water supply (such as alkalinity and hardness),
wastewater constituents, and patterns of use. The end use of the effluent is the responsibility of the owner,
design professionals, and regulatory officials.
System components covered under other NSF or NSF/ANSI standards or criteria shall also comply with the
requirements therein. This Standard shall in no way restrict new system designs, provided such designs
meet the minimum specifications described herein.
| ANSI : | ANSI Approved |
| File Size : | 1
file
, 1.1 MB |
| Note : | This product is unavailable in Ukraine, Belarus, Russia |
| Number of Pages : | 62 |
| Published : | 05/31/2017 |
| Redline File Size : | 2
files
, 5.9 MB |
