Analysis of a Compressor with a Variable Built-in Volume Ratio and an Integrated Linear Motor PDF

Analysis of a Compressor with a Variable Built-in Volume Ratio and an Integrated Linear Motor PDF

Name:
Analysis of a Compressor with a Variable Built-in Volume Ratio and an Integrated Linear Motor PDF

Published Date:
2019

Status:
Active

Description:

Publisher:
ASHRAE

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$4.8
Need Help?
Refrigeration systems have to operate at both full- and part-load conditions. The condenser pressure is a function of the daily or seasonally ambient temperature variations. Whereas, the evaporation pressure is defined by the cooling load which has its own fluctuations. As a consequence, the compressor should dynamically adjust the built-in volume ratio to the compression ratio of the cycle. To this end, piston compressors can provide to some extent flexibility to the system designer. Generally, the discharge valve opens when the in-cylinder pressure becomes slightly higher than the condenser pressure. The drawback of this approach is an over-compression, of which magnitude is dependent on a specific design of the check valve. This over-compression leads to notable losses and decreasing the overall efficiency of the system.
In this work, a free-piston compressor with an integrated linear motor is proposed that utilizes the rotation of the piston to open and close the intake and discharge valves at any moment using the feedback from the pressure sensors. This design allows to open the discharge valve precisely when the pressures equalizes, eliminating over-compression losses. Due to the fact that the valve openings are located on the cylinder walls, the opening can be made much larger than a check valve located in the flange of the cylinder. Thus, the throttling losses can be significantly reduced. The clearance volume is very small which results in a higher volumetric efficiency. The proposed design provides a better flexibility to deliver the target cooling capacity: the stroke length, the frequency and the port timing can be widely adjusted. Furthermore, the unit can be reversed on-the-fly to act as an expander which makes this device attractive to use in reversible heat pump / organic Rankine cycle systems.
File Size : 1 file , 1.2 MB
Note : This product is unavailable in Russia, Belarus
Number of Pages : 6
Product Code(s) : D-2019ICERD7-017
Published : 2019
Units of Measure : Dual

History


Related products


Best-Selling Products

NEMA/MITA CSP 2-2021
Published Date: 2021
Lifecycle Best Practices Framework for Medical Imaging Devices
$14.7
NEMA/MITA DD P1-2019
Published Date: 08/01/2019
White Paper on Understanding the Limited Usefulness of Detector Dose Measurements in Modern Medical X-ray Imaging Equipment
$24.6
NEMA/MITA RMD P1-2019
Published Date: 01/30/2019
White Paper on Considerations for Remanufacturing of Medical Imaging Devices
$14.7
NEMA/MITA RSSTCD 1-2019
Published Date: 2019
White Paper on Radiation Safety Specification and Testing Comparison Document for Medical X-Ray Imaging Devices General Radiography and Fluoroscopy, and Interventional Fluoroscopy
$28.8
NEMA/MITA RSSTCD 2-2020
Published Date: 2020
White Paper on 21 CFR Subchapter J to IEC Comparison Table for Medical X-Ray Imaging Devices Mammography
$30
NEMA/MITA SAC 1-2020
Published Date: 2020
White Paper on Understanding Accountability in Medical Device Servicing
$14.7