C08 -- Applying the new Effective Strategies of HVAC System Design with the Focus on Sustainable Development in Public Buildings in Humid Subtropical Climates PDF

C08 -- Applying the new Effective Strategies of HVAC System Design with the Focus on Sustainable Development in Public Buildings in Humid Subtropical Climates PDF

Name:
C08 -- Applying the new Effective Strategies of HVAC System Design with the Focus on Sustainable Development in Public Buildings in Humid Subtropical Climates PDF

Published Date:
2022

Status:
Active

Description:

Publisher:
ASHRAE

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$4.8
Need Help?

The fact that humidity control of indoor spaces in humid climates is one of the key elements in the design to considerhowever, the challenges are significant energy costs associated with dehumidification such as people's fresh air providing.Since the latent load is remarkable in the fresh air, full fresh air systems (by DOAS units) face a severe challenge indehumidifying air in these areas.

This paper presents a new method to curb the dependence of HVAC systems on electricity usage in public buildings. In thisapproach, an ice storage system, which runs in non-peak load time, supplies the chilled water for dehumidification coils.Hence, the dehumidification coils are applied plus conventional coils to every terminal unit to control the humidity of everyzone. In other words, all air handling units take advantage of 6-pipe coils (2-pipe for cooling coil, 2-pipe for heating coil, and2-pipe for dehumidification coil), and every fan coil unit is similarly equipped with 4-pipe connections of coils by adding thedehumidification coil to the conventional unit. All cooling coils are supplied with central chiller units, whereas thedehumidification coils are fed using an ice storage system to mitigate electricity usage in peak loads.

A passenger terminal has been selected to study in an area with high dry bulb temperature and high relative humiditysimultaneously (JASK harbor in Iran) to prove the effectiveness of this method. In this case, because of the high ceiling ofthe terminal hall, the displacement ventilation alongside the air to air energy heat recovery exchanger could handle the wasteof energy. In addition, using 3-way control valves on each dehumidification coil, humidistats at indoor spaces, and a DDCcontroller for central systems could provide thermal comfort for people. Finally, the results are reported by eQuest 3.65.

The proposed approach results of the case study building demonstrated a 26.2% to 57.6% reduction in electricityconsumption. Moreover, if this novel method applies to large public buildings in humid subtropical areas as a new solution,it is more likely that the use of fossil fuels and consequently carbon dioxide (CO2) emissions can be limited in the near futurefor these areas.  

File Size : 1 file , 3 MB
Note : This product is unavailable in Russia, Belarus
Number of Pages : 10
Product Code(s) : D-ICEB22-08
Published : 2022
Units of Measure : Dual

History


Related products


Best-Selling Products

SN-CEN/TS 1007-7:2006
Published Date: 09/27/2006
Advanced technical ceramics — Ceramic composites. Methods of test for reinforcements — Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
SN-CEN/TS 1046:2021
Published Date: 06/22/2021
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation
SN-CEN/TS 1071-10:2004
Published Date: 07/21/2004
Advanced technical ceramics — Methods of test for ceramic coatings — Part 10: Determination of coating thickness by cross sectioning
SN-CEN/TS 1071-11:2005
Published Date: 10/19/2005
Advanced technical ceramics — Methods of test for ceramic coatings — Part 11: Determination of internal stress by the Stoney formula
SN-CEN/TS 1071-8:2004
Published Date: 09/01/2004
Advanced technical ceramics — Methods of test for ceramic coatings — Part 8: Rockwell indentation test for evaluation of adhesion
SN-CEN/TS 1071-9:2004
Published Date: 02/11/2004
Advanced technical ceramics — Methods of test for ceramic coatings — Part 9: Determination of fracture strain