CH-03-08-1 -- Two-Phase Flow Pattern, Heat Transfer, and Pressure Drop in Microchannel Vaporization of CO2 PDF

The heat-transfer coefficient and pressure drop were measured for flow vaporization of CO2 in an extruded microchannel tube with 25 channels that were 0.81 mm in diameter and 0.5 m in length. The test section was heated by a water jacket, and a regression method was used to derive the internal heat-transfer coefficient based on the measured overall heat-transfer coefficient. Two-phase flow patterns were visualized in a separate test rig, using a 0.98 mm heated glass tube and a high-speed digital camera. Wavy annular flow with entrainment dominated at high mass flux. Flow pattern observations did not fit generalized maps. Heat-transfer measurements were conducted at varying mean vapor fractions at temperatures of 0°C to 25°C, mass flux of 190 to 570 kgm-2s-1, and heat flux of 10 and 20 kWm-2. Heat-transfer results show significant influence of dryout, particularly at high mass flux and high temperature. Nucleate boiling dominates prior to dryout. Frictional pressure drop data were correlated with a mean deviation of 16% using an existing model developed for vertical flow. Heat transfer data were correlated with a combination of models for nucleate boiling, convective evaporation, dryout incipience, and post-dryout heat transfer.

Units: SI