DA-00-10-3 -- Vapor-Liquid Equilibria for a Lubricant Mixture: Measurements and Equation-of-State Modeling PDF

We measured bubble point pressures and coexisting liquid densities for two mixtures of R-134a and a polyolester (POE) lubricant. The mass fraction of the lubricant was approximately 9% and 12%, and the temperature ranged from 280 K to 355 K (44°F to 179°F). We used the Elliott, Suresh, and Donohue (ESD) equation of state to model our bubble point pressure data. The bubble point pressures were represented with an average absolute deviation of 2.5%. A binary interaction parameter reduced the deviation to 1.4%. We also applied the ESD model to other R-134a/POE lubricant data in the literature. As the concentration of the lubricant increased, the performance of the model deteriorated markedly. However, the use of a single binary interaction parameter reduced the deviations significantly.

Units: Dual