Ground Source Heat Pump Systems for Residential Buildings in Warm Climates: Energy, Environmental and Economic Considerations PDF

Ground Source Heat Pump Systems for Residential Buildings in Warm Climates: Energy, Environmental and Economic Considerations PDF

Name:
Ground Source Heat Pump Systems for Residential Buildings in Warm Climates: Energy, Environmental and Economic Considerations PDF

Published Date:
2014

Status:
Active

Description:

Publisher:
ASHRAE

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$4.8
Need Help?

In this paper the heating and cooling energy consumption of a typical single-family house is calculated for five selected locations in Cyprus. Hourly calculations are performed using the EnergyPlus software. The results are translated in oil or LPG and electricity consumption, assuming that the typical building in Cyprus is equipped with an oil-fired or LPG-fired boiler for heating and local air-to-air split-type heat pumps for cooling. The same energy needs are assumed to be covered by an alternative system, i.e. a vertical closed loop ground heat exchanger combined with a water-to-water heat pump system for heating and cooling. The ground source heat pump system is dimensioned with the aid of the EED 3.0 software, analyzed using an in-house developed and validated simulation code, and as a result the electricity consumption of the system is calculated. Based on the resulting fuel consumption of the alternative system, the primary energy consumption and the corresponding emissions are determined, while a financial analysis is also performed. The results prove that significant energy, environmental and economic benefits can be achieved.


File Size : 1 file , 690 KB
Note : This product is unavailable in Russia, Belarus
Number of Pages : 8
Product Code(s) : D-ICEB14-16
Published : 2014

History


Related products


Best-Selling Products

AIIM 10197
Published Date: 01/01/1993
Micrographics — Readers - Printers for transparent microforms — Characteristics
AIIM 10198
Published Date: 01/01/1994
Micrographics — Rotary camera for 16mm microfilm — Mechanical and optical characteristics
AIIM 21
Published Date: 01/01/2009
Standard Recommended Practice Markup Language – Part 1: Stratml Core
AIIM 6198
Published Date: 01/01/1993
Micrographics — Readers for transparent microforms — Performance characteristics
AIIM 7565
Published Date: 01/01/1993
Micrographics — Readers for transparent microforms — Measurement of characteristics
AIIM MS10
Published Date: 01/01/1987
Method for Determining Adhesion of Protection Sheet to Aperture Adhesive of Unitized Microfilm Carrier (Aperture Card)
$15.3