Upper Room UV-Disinfected Mixed Air Use for Chilled Ceiling Displacement Ventilation System to Enhance Air Quality and Performance PDF

Upper Room UV-Disinfected Mixed Air Use for Chilled Ceiling Displacement Ventilation System to Enhance Air Quality and Performance PDF

Name:
Upper Room UV-Disinfected Mixed Air Use for Chilled Ceiling Displacement Ventilation System to Enhance Air Quality and Performance PDF

Published Date:
2014

Status:
Active

Description:

Publisher:
ASHRAE

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Czech version):
200 business days

SKU:
upper-room-uv-disinfected-mixed-air-use-for-chilled-ceiling-displacement-ventilation-system-to-enhance-air-quality-and-performance_1876412

Choose Document Language:
4.80 €
Need Help?

The chilled ceiling (CC) displacement ventilation (DV) system is one of the air conditioning systems that have shown effectiveness in providing air quality through supplying 100% fresh air. The CC/DV system effectiveness and economic viability has been increased when return fraction was recirculated in the supply air stream where the maximum CO2 concentration level does not exceed 700 ppm in the occupied zone. However, it is important to investigate whether satisfying the allowable level of CO2 inside the space ensures that the World Health Organization (WHO) requirement for bacterial and fungal count of less than 500 CFU/m3 (14.2 CFU/ft3) is satisfied. If not, it will be interesting to study the maximum allowable return air ratio that provides good air quality in terms of acceptable CO2 level and acceptable bacterial and fungal count and at the same time improves the energy performance. Since the CC/DV system relies on buoyancy effects for driving the contaminated air upwards, infectious particles will recirculate inside the upper zone before entering the return duct. Such increase in the residence of infectious particles in the upper zone, will allow the effective utilization of upper-room ultraviolet germicidal irradiation (UVGI) to clean the air before recirculating it.

This paper uses an analytical model to investigate the effectiveness of upper-room UVGI mechanism for air disinfection when used with a mixed air CC/DV system. The simplified numerical model combines published multi-layer plume and three-zone mixing models to estimate the airborne bacteria concentration in the upper zone and occupied zone using the maximum allowable return air ratios. The results from this model are compared to a CFD simulation of the same room that incorporates the bacteria inactivation due to UV field.


File Size : 1 file , 2.8 MB
Note : This product is unavailable in Russia, Belarus
Number of Pages : 11
Product Code(s) : D-2014FICEConf-9-3
Published : 2014

History


Related products


Best-Selling Products

DIN CEN/TS 1046
Published Date: 12/01/2023
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation; German version CEN/TS 1046:2021
28.45 €
DIN CEN/TS 1159-4
Published Date: 10/01/2004
Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity; German version CEN/TS 1159-4:2004
23.22 €
DIN CEN/TS 12037
Published Date: 05/01/2004
Wood preservatives - Field test method for determining the relative protective effectiveness of a wood preservative exposed out of ground contact - Horizontal lap-joint method; German version CEN/TS 12037:2003
29.10 €
DIN CEN/TS 12101-11
Published Date: 08/01/2024
Smoke and heat control systems - Part 11: Horizontal flow powered ventilation systems for enclosed car parks; German version CEN/TS 12101-11:2022
35.64 €
DIN CEN/TS 12983-2
Published Date: 07/01/2005
Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 2: Further general requirements and specific requirements for ceramic, glass and glass ceramic cookware; German version CEN/TS 12983-2:2005
26.81 €
DIN CEN/TS 1317-7
Published Date: 04/01/2024
Road restraint systems - Part 7: Performance characterisation and test methods for terminals of safety barriers; German version CEN/TS 1317-7:2023
35.64 €