SAE AIR6504 describes a method for assessing size dependent particle losses in a
sampling and measurement system of specified geometry utilizing the non-volatile PM (nvPM) mass and number
concentrations measured at the end of the sampling system.1 The penetration functions of the sampling and measurement
system may be determined either by measurement or by analytic computational methods.
Loss mechanisms including thermophoretic (which has a very weak size dependence) and size dependent losses are
considered in this method2 along with the uncertainties due to both measurement error and the assumptions of the method.
The results of this system loss assessment allow development of estimated correction factors for nvPM mass and number
concentrations to account for the system losses facilitating estimation of the nvPM mass and number at the engine exhaust
nozzle exit plane. As the particle losses are size dependent, the magnitude of correction factors can vary as a function of
many factors including combustor technology and engine operating condition.
Implementation of the nvPM sampling and measurement system for aircraft engine testing, as per AIR6037, requires a
sample line of up to 35 m and includes several sampling and measurement system components, which result in significant
particle loss on the order of 50% for nvPM mass and 90% for nvPM number.
The system loss correction factors are estimated based on a model with the following inputs and assumptions: engine
exhaust exit plane nvPM have a lognormal distribution, known size dependent values of nvPM effective density and
geometric standard deviation, a minimum particle size cut-off of 10 nm, and no coagulation.
| File Size : | 1
file
, 5.1 MB |
| Note : | This product is unavailable in Ukraine, Russia, Belarus |
| Number of Pages : | 70 |
| Published : | 06/24/2022 |
