SAE AMS4413A PDF

Name:
SAE AMS4413A PDF

Published Date:
12/20/2012

Status:
Active

Description:

Aluminum Alloy, Plate 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved, and Artificially Aged

Publisher:
SAE International

Document status:

Active

Format:

Electronic (PDF)

Delivery time:

10 minutes

Delivery time (for Russian version):

200 business days

SKU:

This specification covers an aluminum-lithium alloy in the form of plate.

This plate has been used typically for parts where low density is needed in combination with a high level of mechanical properties and very good resistance to stress-corrosion cracking, but usage is not limited to such applications.

File Size :	1 file , 64 KB
Note :	This product is unavailable in Ukraine, Russia, Belarus
Published :	12/20/2012

History

SAE AMS4413C

Published Date: 12/20/2023

Aluminum Alloy, Plate 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved, and Artificially Aged

$22.2

SAE AMS4413B

Published Date: 05/10/2019

Aluminum Alloy, Plate 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved, and Artificially Aged

$20.7

SAE AMS4413A

Published Date: 12/20/2012

Aluminum Alloy, Plate 3.5Cu - 1.0Li - 0.40Mg - 0.35Mn - 0.45Ag - 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved, and Artificially Aged

$18.3

SAE AMS4413

Published Date: 10/31/2007

Aluminum Alloy, Plate 3.5 Cu 1.0Li .40Mg .35Mn .45Ag 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved, and Artificially Aged

$16.8

Related products

SAE AMS5579D

Published Date: 04/13/2007

Steel, Corrosion and Heat Resistant Tubing, Welded, 19.5Cr - 9.5Ni - 1.4Mo - 1.4W - 0.42(Cb + Ta) - 0.22Ti, Thin Wall

$28.2

SAE AMS3777/7B

Published Date: 10/01/1995

Tape, Nylon, Nonmelting, Reinforcing 2 (50) Wide, 1500 (6670 N) Breaking Strength

$14.7

SAE AMS4126D

Published Date: 08/01/2019

Aluminum Alloy, Die and Hand Forgings and Rolled Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated

$24.9

Best-Selling Products

IEC/TS 60034-16-2 Ed. 1.0 b:1991

Published Date: 02/15/1991

Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies

$33

IEC/TS 60034-16-3 Ed. 1.0 b:1996

Published Date: 02/14/1996

Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance

$43.5

IEC/TS 60034-17 Ed. 3.0 b:2002

Published Date: 03/26/2002

Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide

$18.3

IEC/TS 60034-17 Ed. 4.0 b:2006

Published Date: 05/09/2006

Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide

$47.1

IEC/TS 60034-18-32 Ed. 1.0 b:1995

Published Date: 03/29/1995

Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 32: Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV

$18.3

IEC/TS 60034-18-33 Ed. 1.0 b:1995

Published Date: 03/29/1995

Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 33: Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA a

$32.1