SAE AMS5931B PDF

Published Date: 10/16/2023

Steel, Wear, Galling, and Corrosion-Resistant Bars, Wire, Forgings, Extrusions, Mechanical Tubing, Rings, and Stock for Forgings, Rings, and Extruding 5.0Mn - 3.5Si - 16.5Cr - 5.0Ni - 0.14N Solution Heat Treated

Published Date: 10/10/2018

Steel, Bars, Wire, Forgings, Extrusions, Tubing, and Rings Wear, Galling, and Corrosion-Resistant 5.0Mn - 3.5Si - 16.5Cr - 5.0Ni - 0.14N Solution Heat Treated

Published Date: 03/12/2003

Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Foil 52.5ni 19cr 3.0mo 5.0cb 0.90ti 0.50al 18fe Consumable Electrode Or Vacuum Induction Melted Precision Cold Rolled, Solution Heat Treated

Published Date: 02/09/2012

Tape, Low Modulus Aramid 2 (51), 3000 (13,345) Breaking Strength (Stabilized: Feb 2012)

Published Date: 06/01/1994

Resin, Conformal Coating, Urethane Elastomer

Published Date: 09/27/2006

Advanced technical ceramics — Ceramic composites. Methods of test for reinforcements — Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature

Published Date: 06/22/2021

Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation

Published Date: 07/21/2004

Advanced technical ceramics — Methods of test for ceramic coatings — Part 10: Determination of coating thickness by cross sectioning

Published Date: 10/19/2005

Advanced technical ceramics — Methods of test for ceramic coatings — Part 11: Determination of internal stress by the Stoney formula

Published Date: 09/01/2004

Advanced technical ceramics — Methods of test for ceramic coatings — Part 8: Rockwell indentation test for evaluation of adhesion

Published Date: 02/11/2004

Advanced technical ceramics — Methods of test for ceramic coatings — Part 9: Determination of fracture strain