Name:
SAE AMS6490G PDF

Published Date:
04/19/2010

Status:
Active

Description:

Steel Bars, Forgings, and Tubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum Melted

Publisher:
SAE International

Document status:

Active

Format:

Electronic (PDF)

Delivery time:

10 minutes

Delivery time (for Russian version):

200 business days

SKU:

This specification covers a premium aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.

These products have been used typically for critical parts, such as bearings, operating under heavy loads and high speeds at moderate temperatures and subject to very rigid inspection standards, but usage is not limited to such applications.

File Size :	1 file , 35 KB
Note :	This product is unavailable in Ukraine, Russia, Belarus
Published :	04/19/2010

History

SAE AMS6490K

Published Date: 08/29/2024

Steel Bars, Forgings, Mechanical Tubing and Forging Stock 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum Melted

$24.9

SAE AMS6490J

Published Date: 11/05/2018

Steel Bars, Forgings, and Tubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum Melted

$24.9

SAE AMS6490H

Published Date: 05/14/2014

Steel Bars, Forgings, and Tubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum Melted

$21

SAE AMS6490G

Published Date: 04/19/2010

Steel Bars, Forgings, and Tubing 4.0Cr - 4.2Mo - 1.0V (0.77 - 0.85C) (M-50) Premium Aircraft-Quality for Bearing Applications Consumable Electrode Vacuum Melted

$21

Related products

SAE AMS3349D

Published Date: 05/27/2014

Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75 (Stabilized: May 2014)

$23.7

SAE AMS5671H

Published Date: 10/16/2019

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenable

$24.9

SAE AMS7311H

Published Date: 08/04/2017

Piston Rings, Centrifugally-Case Alloyed Iron 0.50Mo - 0.50Cu (Stabilized: Aug 2017)

$22.2

SAE AMS1530C

Published Date: 04/29/2020

Cleaner for Aircraft Exterior Surfaces Wipe-On, Wife-Off

$20.7

Best-Selling Products

UNE-IEC/TR 60865-2:2006 IN

Published Date: 04/26/2006

Short-circuit currents - Calculation of effects - Part 2: Examples of calculation.

UNE-IEC/TR 60893-4:2005

Published Date: 02/09/2005

Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 4: Typical values

UNE-IEC/TR 60909-2:2010 IN

Published Date: 02/17/2010

Short-circuit currents in three-phase a.c. systems - Part 2: Data of electrical equipment for short-circuit current calculations.

UNE-IEC/TR 61000-2-8:2006 IN

Published Date: 06/28/2006

Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power supply systems with statistical measurement results (IEC/TR 61000-2-8:2002)

UNE-IEC/TR 61000-3-6:2006 IN

Published Date: 07/19/2006

Electromagnetic compatibility (EMC) - Part 3: Limits - Section 6: Assessment of emission limits for distorting loads in MV and HV power systems - Basic EMC publication (IEC/TR 61000-3-6:1996)

UNE-IEC/TR 61010-3:2006 IN

Published Date: 03/15/2006

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 3: Protocol for the preparation of conformity verification reports for the IEC 61010 2nd edition series .