SN-CEN/TS 16980-1:2016 PDF

SN-CEN/TS 16980-1:2016 PDF

Name:
SN-CEN/TS 16980-1:2016 PDF

Published Date:
12/07/2016

Status:
Active

Description:

Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials

Publisher:
Standards Norway SN-CEN/TS Series

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
Need Help?
ADOPTED_FROM:CEN/TS 16980-1:2016 This standard describes a method for assessing the performance of photocatalytic inorganic materials contained in cement mortars and/or limes or ceramic-based matrices, paints or materials deposited as thin films or coatings on a variety of substrates for the photocatalytic abatement of nitric oxide in the gas phase. This method is not suitable for the assessment of samples to be applied with flow perpendicular to the surface or flow permeating the surface itself as polymeric and paper filters, honeycomb structures and suchlike. The performance for the photocatalytic sample under test is evaluated by measuring the degradation rate of nitric oxide (NO) using the method described herein. The photocatalytic abatement rate is calculated from the observed rate by eliminating the effects of mass transfer. The intrinsic photocatalytic abatement rate is an intrinsic property of the material tested and makes it possible to distinguish the photocatalytic activities of various products with an absolute scale defined with physical and engineering meaning. For the measurements and calculations described in this standard the concentration of nitrogen oxides (NOx) is defined as the stoichiometric sum of nitric oxide (NO) and nitrogen dioxide (NO2). Safety statement Persons using this document should be familiar with the normal laboratory practice, if applicable. This document cannot address all of the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any regulatory conditions. Environmental statement It is understood that some of the material permitted in this standard may have negative environmental impact. As technological advantages lead to better alternatives for these materials, they will be eliminated from this standard to the extent possible. At the end of the test, the user of the standard will take care to carry out an appropriate disposal of the wastes, according to local regulation.
Number of Pages : 28
Published : 12/07/2016

History

SN-CEN/TS 16980-1:2016
Published Date: 12/07/2016
Photocatalysis - Continuous flow test methods - Part 1: Determination of the degradation of nitric oxide (NO) in the air by photocatalytic materials

Related products


Best-Selling Products

INCITS/ISO/IEC 10641
Published Date: 01/01/1993
Information technology - Computer graphics and image processing - Conformance testing of implementations of graphics standards
INCITS/ISO/IEC 10967-1
Published Date: 01/01/1994
Information technology - Language independent arithmetic - Part 1: Integer and floating point arithmetic
INCITS/ISO/IEC 10994
Published Date: 01/01/1992
Information technology - Data interchange on 90 mm flexible disk cartridges using modified frequency modulation recording at 31 831 ftprad on 80 tracks on each side - ISO Type 303
$25.5
INCITS/ISO/IEC 11072
Published Date: 01/01/1992
Information technology - Computer graphics - Computer Graphics Reference Model
INCITS/ISO/IEC 11319
Published Date: 01/01/1993
Information technology - 8 mm wide magnetic tape cartridge for information interchange - Helical scan recording
INCITS/ISO/IEC 11557
Published Date: 01/01/1992
Information technology - 3,81 mm wide magnetic tape cartridge for information interchange - Helical scan recording - DDS-DC format using 60 m and 90 m length tapes