Servo and Stepper Motors
UL 1004-6
1 Scope
1.1 This Standard is intended to be read together with the Standard for Rotating Electrical Machines - General Requirements, UL 1004-1. The numbering of the Sections in this Standard corresponds to the like numbered Sections in UL 1004-1. The numbering of the paragraphs are unique to this Standard, and do not directly correspond to the like numbered paragraphs in UL 1004-1. The requirements in this Standard supplement or amend the requirements in UL 1004-1. The requirements of UL 1004-1 apply unless modified by this Standard. For Sections not shown, refer to the Standard for Rotating Electrical Machines - General Requirements, UL 1004-1.
1.2 This Standard applies to servo and stepper motors. The requirements in this Standard are intended to evaluate the suitability of the motor for normal use when fed from an appropriate controller (drive) through its manufacturer declared normal operating region.
1.3 This Standard does not address:
a) The efficacy of motor overtemperature protection under normal or abnormal conditions; nor
b) The operation of a motor in hazardous (Classified) locations.
| Edition : | 1st |
| Number of Pages : | 12 |
| Published : | 12/16/2009 |
