AWWA ACE91079 PDF

AWWA ACE91079 PDF

Name:
AWWA ACE91079 PDF

Published Date:
01/01/1991

Status:
Active

Description:

Predicting Capacities for SOCs in GAC Pilot Columns

Publisher:
American Water Works Association

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$7.2
Need Help?
Typically, capacities for an organic compound adsorbed on a fixed bed of granular activated carbon (GAC) fall well below the single- solute capacity determined in a batch contactor. Various correction factors are needed to account for the effects of temperature, multisolute competition, and preadsorbed natural organics on adsorption capacities. This paper evaluates GAC capacities determined for chloroform and three synthetic organics (SOCs) adsorbed on a post contactor operated at the Waterford Water Works for 225 days. Previous adsorption isotherm measurements indicated that single-solute GAC capacities for the target compounds range from low to high: chloroform (CHCl3), trichloroethylene (TCE), (2,4-dichlorophenoxy)acetic acid (2,4-D) atrazine. The purpose of this paper is to discuss differences between the pilot column capacities and values expected from adsorption isotherm experiments in batch systems.
File Size : 1 file
ISBN(s) : 0898675901
Note : This product is unavailable in Ukraine, Russia, Belarus
Number of Pages : 20
Published : 01/01/1991

History


Related products

AWWA ACE91098
Published Date: 01/01/1991
Mass Transport and Colloidal Fouling in Pressure-Driven Membrane Processes: Considerations in Potable Water Treatment
$7.2
AWWA ACE91097
Published Date: 01/01/1991
Selective Alum Recovery From Clarifier Sludge: A New Two-Step Process Using Composite Membranes
$7.2
AWWA ACE91094
Published Date: 01/01/1991
Ozone-Bromide Interactions in Water Treatment
$7.2
AWWA ACE91091
Published Date: 01/01/1991
Enumeration and Disinfection of Bacteria Associated With Particles Released From GAC Filter-Adsorbers
$7.2

Best-Selling Products

IEC/TS 60034-16-2 Ed. 1.0 b:1991
Published Date: 02/15/1991
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies
$33
IEC/TS 60034-16-3 Ed. 1.0 b:1996
Published Date: 02/14/1996
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance
$43.5
IEC/TS 60034-17 Ed. 3.0 b:2002
Published Date: 03/26/2002
Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide
$18.3
IEC/TS 60034-17 Ed. 4.0 b:2006
Published Date: 05/09/2006
Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide
$47.1
IEC/TS 60034-18-32 Ed. 1.0 b:1995
Published Date: 03/29/1995
Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 32: Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV
$18.3
IEC/TS 60034-18-33 Ed. 1.0 b:1995
Published Date: 03/29/1995
Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 33: Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA a
$32.1