CGA V-9 PDF

This standard covers cylinder valve design, manufacture, and use including performance requirements such as operating temperature limits, pressure ranges, and flow capabilities. It also includes requirements such as materials, inlet and outlet connections, cleaning, qualification and production testing, maintenance, and reconditioning. This standard also includes guidelines and requirements for the design, material selection, testing, and marking of cylinder valve protection caps. Except as noted in the last paragraph of this section, this standard is intended for valves for compressed gases packaged in U.S. Department of Transportation (DOT) and Transport Canada (TC) cylinders.

This standard provides information on valve selection, valve use guidelines, and valve protection caps (see Appendix A, Appendix B, and Section 10, respectively).

This standard does not prejudice the continued use of valves in service or in inventory at a manufacturer's or user's site that were manufactured before the effective date of this standard provided the valves are identifiable to the original valve manufacturer and traceable to a manufacturing period. The identifying marks shall be permanent and visible on an installed valve.

The effective date of this standard is three years from the date of the publication of this edition, which was November 15, 2019. Valves manufactured on and after the effective date of this standard shall be in compliance with this standard.

This standard does not prohibit the use of valves that are Listed.

The following valves shall meet the requirements of ISO 10297, Gas cylinders—Cylinder valves—Specification and type testing as well as the additional requirements given in this standard:

• cylinder valves intended to be fitted to refillable transportable gas cylinders;
• main valves (excluding ball valves) for cylinder bundles;
• cylinder valves or main valves with an integrated pressure regulator (VIPR) for nonmedical purposes;
• cylinder valves for pressure drums; and
• cylinder valves for tubes (excluding ball valves) not mounted to a chassis or framework.

This standard does not apply to:

• Cylinder valves used with nonrefillable cylinders (such as DOT-39, TC-39M, and nonrefillable cylinders manufactured under special permits or equivalency certificate);
• Self-closing cylinder valves installed on refillable cylinders that comply with ISO 17879, Gas cylinders—Self closing cylinder valves—Specifications and type testing;
• Cylinder valves used in DOT-2P and DOT-2Q (TC-2P and TC-2Q) cylinders;
• Cylinder valves with an integrated pressure regulator (VIPR) used for medical purposes. See CGA E-18, Medical Gas Valve Integrated Pressure Regulators;
• Pressure regulating portion of valves with integrated pressure regulators (VIPRs) for nonmedical purposes. The shutoff valve portion shall comply with this standard;
• Cylinder valves on DOT-4L (TC-4LM) cylinders;
• Cylinder valves in refrigerated liquid service;
• Cylinder valves on DOT/TC/UN cylinders (tubes) that are mounted to a chassis or framework for road transportation; and
• Quick release cylinder valves (for example, for fire-extinguishing, explosion protection, and rescue applications) that comply with ISO 17871, Gas cylinders—Quick-release cylinder valves—Specification and type testing.