DANSK DSF/IEC TR 61000-5-1 ED2 PDF

This part covers general considerations and guidelines on mitigation methods aimed at ensuring electromagnetic compatibility (EMC) among electrical and electronic apparatus or systems used in industrial, commercial, and residential installations. This technical report is intended for use by all using and installing sensitive electrical and/or electronic installations and systems, and equipment with high emission levels that could degrade the overall electromagnetic (EM) environment. It applies primarily to new installations, but also applies during modifications and/or enhancements of legacy installations. Specific topics, such as recommendations on the design and implementation of the earthing system, including the earth electrode and the earth network, the design and implementation of bonding apparatus or systems to earth or to the earth network, the selection and installation of appropriate cables, and the design and implementation mitigation means involving shielded enclosures, high-frequency filters, isolating transformers, surge-protective devices, etc. will be addressed in other parts of IEC 61000-5. Within this publication the fundamental measures will be described. The practice presented in this report address the EMC concerns of the installation, not the safety aspects of the installation nor the efficient transportation of power within the installation. Nevertheless, these two prime objectives are taken into consideration in the technical observations concerning EMC. These two primary objectives can be implemented concurrently for enhanced EMC of the installed sensitive apparatus or systems without conflict by applying the practices presented in this report and the relevant safety requirements. It is the responsibility of the designer and the installer to select the relevant technique most appropriate to a particular installation.