FORD ESR-M2C129-C PDF

FORD ESR-M2C129-C PDF

Name:
FORD ESR-M2C129-C PDF

Published Date:
10/08/1982

Status:
[ Revised ]

Description:

OIL - ENGINE, ENERGY CONSERVING, EXCEEDING API SERVICE CATEGORY "SF" SERVICE FILL

Publisher:
Ford Motor Company

Document status:

Active

Format:

Electronic (PDF)

Delivery time:

10 minutes

Delivery time (for Russian version):

200 business days

SKU:

1. SCOPE

This specification establishes the performance and product requirements for packaged energy conserving automotive service fill engine oils exceeding the minimal requirements of American Petroleum Institute (API) service category "SF" to be marketed under the Motorcraft trademark. These oils are intended to give additional protection against sludge, varnish, wear, oxidation and corrosion, while providing fuel economy benefits. This specification is not intended to limit the material to any specific formulation, but rather defines the total performance required of these engine oils.

Edition :	82
File Size :	1 file , 8.6 KB
Number of Pages :	2
Published :	10/08/1982

History

FORD ESR-M2C129-C

FORD ESR-M2C129-C

Published Date: 10/27/2009

OIL, ENGINE - ENERGY CONSERVING - EXCEEDING API SERVICE CATEGORY "SF" SERVICE FILL ***TO BE USED WITH FORD WSS-M99P1111-A***

$9

FORD ESR-M2C129-C

FORD ESR-M2C129-C

Published Date: 05/12/2004

OIL, ENGINE - ENERGY CONSERVING - EXCEEDING API SERVICE CATEGORY "SF" SERVICE FILL ***TO BE USED WITH FORD WSS-M99P1111-A***

$9

FORD ESR-M2C129-C

FORD ESR-M2C129-C

Published Date: 10/08/1982

OIL - ENGINE, ENERGY CONSERVING, EXCEEDING API SERVICE CATEGORY "SF" SERVICE FILL

$9

Related products

FORD WSE-M1C180-B

FORD WSE-M1C180-B

Published Date: 10/13/2008

GREASE, POLYUREA, NLGI GRADE 2 ***TO BE USED WITH FORD WSS-M99P1111-A***

$9

FORD WSS-M33J8-A1

FORD WSS-M33J8-A1

Published Date: 04/05/2022

ENAMEL, THERMOSET BASECOAT, WET-ON-WET IN PRIME PROCESS, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***

$9

FORD WSS-M2C923-A2

FORD WSS-M2C923-A2

Published Date: 11/11/2009

OIL, ENGINE, INITIAL FILL, API SJ/CF AND ACEA A3/B3, SAE 5W-40 ***TO BE USED WITH FORD WSS-M99P1111-A***

$9

FORD ESP-M4G219-A

FORD ESP-M4G219-A

Published Date: 11/20/1978

SEALER, GENERAL PURPOSE

$9

Best-Selling Products

IEC/TS 60034-16-2 Ed. 1.0 b:1991

IEC/TS 60034-16-2 Ed. 1.0 b:1991

Published Date: 02/15/1991

Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies

$33

IEC/TS 60034-16-3 Ed. 1.0 b:1996

IEC/TS 60034-16-3 Ed. 1.0 b:1996

Published Date: 02/14/1996

Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance

$43.5

IEC/TS 60034-17 Ed. 3.0 b:2002

IEC/TS 60034-17 Ed. 3.0 b:2002

Published Date: 03/26/2002

Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide

$18.3

IEC/TS 60034-17 Ed. 4.0 b:2006

IEC/TS 60034-17 Ed. 4.0 b:2006

Published Date: 05/09/2006

Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide

$47.1

IEC/TS 60034-18-32 Ed. 1.0 b:1995

IEC/TS 60034-18-32 Ed. 1.0 b:1995

Published Date: 03/29/1995

Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 32: Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV

$18.3

IEC/TS 60034-18-33 Ed. 1.0 b:1995

IEC/TS 60034-18-33 Ed. 1.0 b:1995

Published Date: 03/29/1995

Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 33: Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA a

$32.1