FORD ESR-M2C129-C PDF

FORD ESR-M2C129-C PDF

Name:
FORD ESR-M2C129-C PDF

Published Date:
05/12/2004

Status:
[ Revised ]

Description:

OIL, ENGINE - ENERGY CONSERVING - EXCEEDING API SERVICE CATEGORY "SF" SERVICE FILL ***TO BE USED WITH FORD WSS-M99P1111-A***

Publisher:
Ford Motor Company

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Czech version):
200 business days

SKU:
ford-esr-m2c129-c_2870051

Choose Document Language:
9.00 €
Need Help?

1. SCOPE

This specification establishes the performance and product requirements for packaged energy conserving automotive service fill engine oils exceeding the minimal requirements of American Petroleum Institute (API) service category "SF" to be marketed under the Motorcraft trademark. These oils are intended to give additional protection against sludge, varnish, wear, oxidation and corrosion, while providing fuel economy benefits.

This specification is not intended to limit the material to any specific formulation, but rather defines the total performance required of these engine oils.


Edition : 04
File Size : 1 file , 79 KB
Number of Pages : 2
Published : 05/12/2004

History

FORD ESR-M2C129-C
Published Date: 10/27/2009
OIL, ENGINE - ENERGY CONSERVING - EXCEEDING API SERVICE CATEGORY "SF" SERVICE FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
9.00 €
FORD ESR-M2C129-C
Published Date: 05/12/2004
OIL, ENGINE - ENERGY CONSERVING - EXCEEDING API SERVICE CATEGORY "SF" SERVICE FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
9.00 €
FORD ESR-M2C129-C
Published Date: 10/08/1982
OIL - ENGINE, ENERGY CONSERVING, EXCEEDING API SERVICE CATEGORY "SF" SERVICE FILL
9.00 €

Related products

FORD FLTM BU 154-01
Published Date: 09/17/2021
QUICK KNIFE ADHESION TEST METHOD FOR GLASS BONDING SYSTEMS
9.00 €
FORD ESA-M1A270-A
Published Date: 06/16/2022
STEEL TUBING - ZINC/ALUMINUM COATED ***TO BE USED WITH FORD WSS-M99P1111-A***
9.00 €
FORD WSS-M99P33-A
Published Date: 01/22/2020
STRUCTURAL PERFORMANCE, CAVITY REINFORCING ENGINEERED PARTS, HEAT CURING ***TO BE USED WITH FORD WSS-M99P1111-A***
9.00 €
FORD ESF-M3L86-A
Published Date: 02/16/2005
EPOXY POWDER, ELECTRICAL INSULATION SPRAY OR FLUIDIZED BED APPLICATION ***TO BE USED WITH FORD WSS-M99P1111-A***
9.00 €

Best-Selling Products

SN-CEN/TS 1007-7:2006
Published Date: 09/27/2006
Advanced technical ceramics — Ceramic composites. Methods of test for reinforcements — Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
SN-CEN/TS 1046:2021
Published Date: 06/22/2021
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation
SN-CEN/TS 1071-10:2004
Published Date: 07/21/2004
Advanced technical ceramics — Methods of test for ceramic coatings — Part 10: Determination of coating thickness by cross sectioning
SN-CEN/TS 1071-11:2005
Published Date: 10/19/2005
Advanced technical ceramics — Methods of test for ceramic coatings — Part 11: Determination of internal stress by the Stoney formula
SN-CEN/TS 1071-8:2004
Published Date: 09/01/2004
Advanced technical ceramics — Methods of test for ceramic coatings — Part 8: Rockwell indentation test for evaluation of adhesion
SN-CEN/TS 1071-9:2004
Published Date: 02/11/2004
Advanced technical ceramics — Methods of test for ceramic coatings — Part 9: Determination of fracture strain