NR NR/L2/SIG/11201/MOD B19 ISSUE 5 PDF

Unless otherwise stated, this guidance is generally applicable to the typical signal operation and proving and AWS circuits listed in NR/GN/SIG/CAT005.

The requirements for line circuits, including polarised circuits, are given in NR/L2/SIG/11201, Module B3.

PURPOSE AND INTRODUCTION

This module forms part of the Signalling Design handbook (SDH: NR/L2/SIG/11201) and is to be read in conjunction with the other modules of the handbook and reference documentation.

It contains requirements and guidance on signalling engineering applications. The content supports the specific and general requirements described in Railway Group Standards and the Network Rail Signalling Principles Handbook [NR/L2/SIG/30009].

NOTE Where there is a conflict between this standard and a Railway Group Standard or the Network Rail Signalling Principles Handbook [NR/L2/SIG/30009] then this standard does not take precedence.

Decisions made by a competent person should be supported by appropriate evidence or documentation.

NOTE Use of designer notes on drawings (see HSE CDM guidance) will generally suffice as may Design Log entries.

Any adoption of alternative solutions requires an assessment commensurate with the significance of the proposed change and which follows the guidance provided by the Common Safety Method for Risk Evaluation and Assessment [CSM-RA]; Network Rail’s adopted method for the control of safety risks.