Name:
ASTM A325-06 PDF

Published Date:
08/01/2006

Status:
Active

Description:

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

Publisher:
ASTM International

Document status:

Active

Format:

Electronic (PDF)

Delivery time:

10 minutes

Delivery time (for Russian version):

200 business days

SKU:

1.1 This specification covers two types of quenched and tempered steel heavy hex structural bolts having a minimum tensile strength of 120 ksi for sizes 1.0 in. and less and 105 ksi for sizes over 1.0 to 11/2 in., inclusive.

1.2 The bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification for Structural Joints Using ASTM A 325 or A 490 Bolts, approved by the Research Council on Structural Connections, endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute.

1.3 The bolts are furnished in sizes 1/2 to 11/2 in., inclusive. They are designated by type, denoting chemical composition as follows:

Type	Description
Type 1	Medium carbon, carbon boron, or medium carbon alloy steel.
Type 2	Withdrawn in November 1991.
Type 3	Weathering steel.

Note 1 - Bolts for general applications, including anchor bolts, are covered by Specification A 449. Also refer to Specification A 449 for quenched and tempered steel bolts and studs with diameters greater than 11/2 in. but with similar mechanical properties.

Note 2

A complete metric companion to Specification A 325 has been developed-Specification A 325M; therefore, no metric equivalents are presented in this specification.

1.4 This specification is applicable to heavy hex structural bolts only. For bolts of other configurations and thread lengths with similar mechanical properties, see Specification A 449.

1.5 Terms used in this specification are defined in Terminology F 1789.

The following safety hazard caveat pertains only to the test methods portion, Section 10, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

File Size :	1 file , 110 KB
Note :	This product is unavailable in Russia, Ukraine, Belarus
Number of Pages :	8
Published :	08/01/2006
Redline File Size :	2 files , 200 KB

History

ASTM F3125/F3125M-23

Published Date: 11/01/2023

Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength

$20.7

ASTM F3125/F3125M-22

Published Date: 06/01/2022

$24.9

ASTM F3125/F3125M-21

Published Date: 12/01/2021

$21.6

ASTM F3125/F3125M-19e2

Published Date: 12/01/2019

$21.6

ASTM F3125/F3125M-19e1

Published Date: 12/01/2019

$20.7

ASTM F3125/F3125M-19

Published Date: 12/01/2019

$20.1

ASTM F3125/F3125M-18

Published Date: 12/01/2018

$20.1

ASTM A325M-14

Published Date: 09/01/2014

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) (Withdrawn 2016)

$18

ASTM F2280-14

Published Date: 09/01/2014

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016)

$17.4

ASTM A325-14

Published Date: 09/01/2014

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016)

$18

ASTM A490-14a

Published Date: 09/01/2014

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016)

$17.4

ASTM A490M-14a

Published Date: 09/01/2014

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric) (Withdrawn 2016)

$17.4

ASTM F1852-14

Published Date: 09/01/2014

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016)

$17.4

ASTM A490-14

Published Date: 08/01/2014

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$17.4

ASTM A490M-14

Published Date: 08/01/2014

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$17.4

ASTM A325M-13

Published Date: 02/15/2013

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)

$18

ASTM A490-12

Published Date: 04/01/2012

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-12

Published Date: 04/01/2012

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$18

ASTM F2280-12

Published Date: 03/16/2012

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$17.4

ASTM A490-11

Published Date: 12/15/2011

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-11

Published Date: 12/15/2011

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$18

ASTM F2280-11a

Published Date: 11/01/2011

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$15

ASTM F1852-11

Published Date: 11/01/2011

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM F2280-11

Published Date: 05/01/2011

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$17.4

ASTM A490-10ae1

Published Date: 12/01/2010

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490-10a

Published Date: 12/01/2010

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-10e1

Published Date: 12/01/2010

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$18

ASTM A490M-10

Published Date: 12/01/2010

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$18

ASTM A325-10e1

Published Date: 05/01/2010

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A325-10

Published Date: 05/01/2010

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-10

Published Date: 05/01/2010

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A325-09ae1

Published Date: 12/01/2009

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A325-09a

Published Date: 12/01/2009

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-09

Published Date: 11/01/2009

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-09a

Published Date: 11/01/2009

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$18

ASTM A490M-09

Published Date: 05/01/2009

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$18

ASTM A325M-09

Published Date: 01/01/2009

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$15

ASTM A325-09

Published Date: 01/01/2009

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-08b

Published Date: 12/01/2008

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-08

Published Date: 12/01/2008

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

$18

ASTM F1852-08

Published Date: 12/01/2008

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM A325M-08

Published Date: 06/01/2008

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$18

ASTM A490-08a

Published Date: 01/15/2008

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM F2280-08e1

Published Date: 01/01/2008

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$17.4

ASTM F2280-08

Published Date: 01/01/2008

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$17.4

ASTM A490-08

Published Date: 01/01/2008

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A325M-07

Published Date: 12/01/2007

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$18

ASTM A325-07a

Published Date: 12/01/2007

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM F1852-07

Published Date: 12/01/2007

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM A325-07

Published Date: 09/15/2007

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A325-06

Published Date: 08/01/2006

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-06

Published Date: 08/01/2006

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM F2280-06

Published Date: 04/01/2006

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$17.4

ASTM A325M-05

Published Date: 12/01/2005

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$18

ASTM F1852-05

Published Date: 01/01/2005

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM A325M-04b

Published Date: 09/01/2004

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$18

ASTM A325-04b

Published Date: 09/01/2004

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A325M-04a

Published Date: 08/01/2004

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$18

ASTM A325-04a

Published Date: 08/01/2004

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-04a

Published Date: 08/01/2004

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-04a

Published Date: 08/01/2004

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

$18

ASTM F1852-04a

Published Date: 08/01/2004

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM A325M-04

Published Date: 01/01/2004

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$18

ASTM A325-04

Published Date: 01/01/2004

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-04

Published Date: 01/01/2004

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-04

Published Date: 01/01/2004

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

$18

ASTM F1852-04

Published Date: 01/01/2004

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM A490M-03

Published Date: 05/10/2003

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

$18

ASTM A325M-03

Published Date: 01/10/2003

Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric]

$18

ASTM F1852-02

Published Date: 12/10/2002

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM A325-02

Published Date: 01/10/2002

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A325-00

Published Date: 01/10/2002

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-02

Published Date: 01/10/2002

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490-00

Published Date: 01/10/2002

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A325M-00

Published Date: 05/10/2000

Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric]

$18

ASTM A490M-00

Published Date: 05/10/2000

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

$18

ASTM F1852-00

Published Date: 05/10/2000

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18.6

Best-Selling Products

RUREGS SNIP 1.04.03 PART I SEC A 1-6

Published Date: 01/01/1991

СНиП 1.04.03-85* Нормы продолжительности строительства и задела в строительстве предприятий, зданий и сооружений. Часть I. (Общие положения. Раздел А (подразделы 1-6))

$8.4

RUREGS SNIP 1.04.03 PART I SEC A 10-13

Published Date: 01/01/1991

СНиП 1.04.03-85* Нормы продолжительности строительства и задела в строительстве предприятий, зданий и сооружений. Часть I. (Раздел А (подразделы 10-13))

$7.8

RUREGS SNIP 1.04.03 PART I SEC A 14-24

Published Date: 01/01/1991

СНиП 1.04.03-85* Нормы продолжительности строительства и задела в строительстве предприятий, зданий и сооружений. Часть I. (Раздел А (подразделы 14-24))

$7.5

RUREGS SNIP 1.04.03 PART I SEC A 7-10

Published Date: 01/01/1991

СНиП 1.04.03-85* Нормы продолжительности строительства и задела в строительстве предприятий, зданий и сооружений. Часть I. (Раздел А (подразделы 7-10))

$8.7

RUREGS SNIP 1.04.03 PART II SEC B 1-5

Published Date: 01/01/1991

СНиП 1.04.03-85* Нормы продолжительности строительства и задела в строительстве предприятий, зданий и сооружений. Часть II (Раздел Б (подразделы 1-5))

$6.3

RUREGS SNIP 1.04.03 PART II SEC B 1-9

Published Date: 01/01/1991

СНиП 1.04.03-85* Нормы продолжительности строительства и задела в строительстве предприятий, зданий и сооружений. Часть II (Раздел В (подразделы 1-9), Раздел Г)

$7.5

ASTM A325-06 PDF

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

History

Related products

Best-Selling Products