ASTM A325-07 PDF

ASTM A325-07 PDF

Name:
ASTM A325-07 PDF

Published Date:
09/15/2007

Status:
Active

Description:

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

Publisher:
ASTM International

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Czech version):
200 business days

SKU:
astm-a325-07_1521517

Choose Document Language:
18.00 €
Need Help?

1.1 This specification covers two types of quenched and tempered steel heavy hex structural bolts having a minimum tensile strength of 120 ksi for sizes 1.0 in. and less and 105 ksi for sizes over 1.0 to 11/2 in., inclusive.

1.2 The bolts are intended for use in structural connections. These connections are covered under the requirements of the Specification for Structural Joints Using ASTM A 325 or A 490 Bolts, approved by the Research Council on Structural Connections, endorsed by the American Institute of Steel Construction and by the Industrial Fastener Institute.

1.3 The bolts are furnished in sizes 1/2 to 11/2 in., inclusive. They are designated by type, denoting chemical composition as follows:

Type Description Type 1 Medium carbon, carbon boron, or medium carbon alloy steel. Type 2 Withdrawn in November 1991. Type 3 Weathering steel. Note 1Bolts for general applications, including anchor bolts, are covered by Specification A 449. Also refer to Specification A 449 for quenched and tempered steel bolts and studs with diameters greater than 11/2 in. but with similar mechanical properties.

Note 2

A complete metric companion to Specification A 325 has been developed-Specification A 325M; therefore, no metric equivalents are presented in this specification.

1.4 This specification is applicable to heavy hex structural bolts only. For bolts of other configurations and thread lengths with similar mechanical properties, see Specification A 449.

1.5 Terms used in this specification are defined in Terminology F 1789.

The following safety hazard caveat pertains only to the test methods portion, Section , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.


File Size : 1 file , 110 KB
Note : This product is unavailable in Russia, Ukraine, Belarus
Number of Pages : 8
Published : 09/15/2007
Redline File Size : 2 files , 200 KB

History

ASTM F3125/F3125M-23
Published Date: 11/01/2023
Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
20.70 €
ASTM F3125/F3125M-22
Published Date: 06/01/2022
Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
24.90 €
ASTM F3125/F3125M-21
Published Date: 12/01/2021
Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
21.60 €
ASTM F3125/F3125M-19e2
Published Date: 12/01/2019
Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
21.60 €
ASTM F3125/F3125M-19e1
Published Date: 12/01/2019
Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
20.70 €
ASTM F3125/F3125M-19
Published Date: 12/01/2019
Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
20.10 €
ASTM F3125/F3125M-18
Published Date: 12/01/2018
Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
20.10 €
ASTM A325M-14
Published Date: 09/01/2014
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) (Withdrawn 2016)
18.00 €
ASTM F2280-14
Published Date: 09/01/2014
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016)
17.40 €
ASTM A325-14
Published Date: 09/01/2014
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016)
18.00 €
ASTM A490-14a
Published Date: 09/01/2014
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016)
17.40 €
ASTM A490M-14a
Published Date: 09/01/2014
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric) (Withdrawn 2016)
17.40 €
ASTM F1852-14
Published Date: 09/01/2014
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016)
17.40 €
ASTM A490-14
Published Date: 08/01/2014
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
17.40 €
ASTM A490M-14
Published Date: 08/01/2014
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
17.40 €
ASTM A325M-13
Published Date: 02/15/2013
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)
18.00 €
ASTM A490-12
Published Date: 04/01/2012
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM A490M-12
Published Date: 04/01/2012
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
18.00 €
ASTM F2280-12
Published Date: 03/16/2012
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
17.40 €
ASTM A490-11
Published Date: 12/15/2011
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM A490M-11
Published Date: 12/15/2011
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
18.00 €
ASTM F2280-11a
Published Date: 11/01/2011
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
15.00 €
ASTM F1852-11
Published Date: 11/01/2011
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
17.40 €
ASTM F2280-11
Published Date: 05/01/2011
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
17.40 €
ASTM A490-10ae1
Published Date: 12/01/2010
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM A490-10a
Published Date: 12/01/2010
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM A490M-10e1
Published Date: 12/01/2010
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
18.00 €
ASTM A490M-10
Published Date: 12/01/2010
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
18.00 €
ASTM A325-10e1
Published Date: 05/01/2010
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.00 €
ASTM A325-10
Published Date: 05/01/2010
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.00 €
ASTM A490-10
Published Date: 05/01/2010
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM A325-09ae1
Published Date: 12/01/2009
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.00 €
ASTM A325-09a
Published Date: 12/01/2009
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.00 €
ASTM A490-09
Published Date: 11/01/2009
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM A490M-09a
Published Date: 11/01/2009
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
18.00 €
ASTM A490M-09
Published Date: 05/01/2009
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
18.00 €
ASTM A325M-09
Published Date: 01/01/2009
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
15.00 €
ASTM A325-09
Published Date: 01/01/2009
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.00 €
ASTM A490-08b
Published Date: 12/01/2008
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM A490M-08
Published Date: 12/01/2008
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
18.00 €
ASTM F1852-08
Published Date: 12/01/2008
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
17.40 €
ASTM A325M-08
Published Date: 06/01/2008
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
18.00 €
ASTM A490-08a
Published Date: 01/15/2008
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM F2280-08e1
Published Date: 01/01/2008
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
17.40 €
ASTM F2280-08
Published Date: 01/01/2008
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
17.40 €
ASTM A490-08
Published Date: 01/01/2008
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM A325M-07
Published Date: 12/01/2007
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
18.00 €
ASTM A325-07a
Published Date: 12/01/2007
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.00 €
ASTM F1852-07
Published Date: 12/01/2007
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
17.40 €
ASTM A325-07
Published Date: 09/15/2007
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.00 €
ASTM A325-06
Published Date: 08/01/2006
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.00 €
ASTM A490-06
Published Date: 08/01/2006
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM F2280-06
Published Date: 04/01/2006
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
17.40 €
ASTM A325M-05
Published Date: 12/01/2005
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
18.00 €
ASTM F1852-05
Published Date: 01/01/2005
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
17.40 €
ASTM A325M-04b
Published Date: 09/01/2004
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
18.00 €
ASTM A325-04b
Published Date: 09/01/2004
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.00 €
ASTM A325M-04a
Published Date: 08/01/2004
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
18.00 €
ASTM A325-04a
Published Date: 08/01/2004
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.00 €
ASTM A490-04a
Published Date: 08/01/2004
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM A490M-04a
Published Date: 08/01/2004
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
18.00 €
ASTM F1852-04a
Published Date: 08/01/2004
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
17.40 €
ASTM A325M-04
Published Date: 01/01/2004
Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
18.00 €
ASTM A325-04
Published Date: 01/01/2004
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.00 €
ASTM A490-04
Published Date: 01/01/2004
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM A490M-04
Published Date: 01/01/2004
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
18.00 €
ASTM F1852-04
Published Date: 01/01/2004
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
17.40 €
ASTM A490M-03
Published Date: 05/10/2003
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
18.00 €
ASTM A325M-03
Published Date: 01/10/2003
Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric]
18.00 €
ASTM F1852-02
Published Date: 12/10/2002
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
17.40 €
ASTM A325-02
Published Date: 01/10/2002
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.00 €
ASTM A325-00
Published Date: 01/10/2002
Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.00 €
ASTM A490-02
Published Date: 01/10/2002
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM A490-00
Published Date: 01/10/2002
Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
18.00 €
ASTM A325M-00
Published Date: 05/10/2000
Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric]
18.00 €
ASTM A490M-00
Published Date: 05/10/2000
Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]
18.00 €
ASTM F1852-00
Published Date: 05/10/2000
Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
18.60 €

Related products

ASTM F3125/F3125M-23
Published Date: 11/01/2023
Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
20.70 €
ASTM F593-24
Published Date: 09/01/2024
Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
18.90 €
ASTM F2482/F2482M-21
Published Date: 12/01/2021
Standard Specification for Load-Indicating Externally Threaded Fasteners
16.20 €

Best-Selling Products

DIN/VDE 0100-410
Published Date: 01/01/1997
Erection of Power Installations with Nominal Voltages up to 1000 V - Part 4: Protection for Safety; Chapter 41: Protection Against Electric Shock (IEC 60364-4-41:1992, modified)
DIN/VDE 0100-470
Published Date: 02/01/1996
Erection of Power Installations with Nominal Voltages up to 1000 V - Part 4: Protection for Safety; Chapter 47: Application of Protective Measures for Safety (IEC 60364-4-47 modified)
DIN/VDE 0170/0171-109
Published Date: 12/01/1988
Electrical Apparatus for Explosive Gas Atmospheres - Revision of IEC 79-1 - Construction and Test of Flameproof Enclosures of Electrical Apparatus
15.90 €
DIN/VDE 0207 PT 4
Published Date: 01/01/1986
Insulating and Sheathing and Compounds for Cables and Flexible Cords; PVC Insulating and Compounds (June)
6.30 €
DIN/VDE 0207 PT 5
Published Date: 01/01/1986
Insulating and Sheathing Compounds for Cables and Flexible Cords; PVC Sheathing Compounds (July)
6.30 €
DIN/VDE 0207
Published Date: 01/01/1982
Insulating and Sheathing Compounds for Cables and Flexible Cords; Rubber Sheathing Compounds (July)
4.80 €