Name:
ASTM A490M-00 PDF

Published Date:
05/10/2000

Status:
Active

Description:

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

Publisher:
ASTM International

Document status:

Active

Format:

Electronic (PDF)

Delivery time:

10 minutes

Delivery time (for Russian version):

200 business days

SKU:

1.1 This specification covers the chemical and mechanical requirements of quenched and tempered steel bolts, in nominal thread diameters M16 to M36, inch. These bolts are intended for use in structural joints that are comparable to those made under the Specification for Structural Joints Using ASTM A325 or A490 Bolts issued by the Research Council on Structural Connections of the Engineering Foundation. The various types of bolts covered by this specification are:

1.1.1 Type 1- Bolts made of alloy steel, supplied in nominal thread diameters M16 to M36, inclusive.

1.1.2 Type 2- Bolts made from what is generally described as low-carbon martensite steel, supplied in nominal thread diameters M16 to M24 inclusive.

1.1.3 Type 3- Bolts in nominal thread diameters M16 to M36, inclusive, having atmospheric corrosion resistance and weathering characteristics comparable to that of the steels covered in Specifications A588/A588M, A242/A242M, and A709/A709M. The atmospheric corrosion resistance of these steels is substantially better than that of carbon steel with or without copper addition. See 6.3. When properly exposed to the atmosphere, these steels can be used bare (uncoated) for many applications.

1.2 Unless otherwise specified, all nuts used on these bolts shall conform to the requirements of Specification A563M, shall be heavy hex, and shall be of the class and surface finish for each type of bolt as follows:

Bolt Type and Finish Nut Class and Finish 1 and 2, plain (noncoated) 10S, 1053, plain 3, plain 10S3, plain

1.3 Unless otherwise specified, all washers used on these bolts shall conform to the requirements of Specification F436M and shall be of a surface finish for each type of bolt as follows:

Bolt Type and Finish Washer Finish 1 and 2, plain (uncoated) plain (uncoated) 3, plain weathering steel, plain

1.4 This specification provides that heavy hex structural bolts and heavy hex nuts shall be furnished unless other dimensional requirements are stipulated in the purchase inquiry and order.

Note 1-For quenched and tempered steel bolts, studs, and other externally threaded fasteners with nominal thread diameters larger than M36, but with similar mechanical properties, refer to class 10.9 of Specification F568. Note 2-This specification is the metric companion of Specification A490.

File Size :	1 file , 48 KB
Note :	This product is unavailable in Russia, Ukraine, Belarus
Number of Pages :	5
Published :	05/10/2000

History

ASTM F3125/F3125M-23

Published Date: 11/01/2023

Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength

$20.7

ASTM F3125/F3125M-22

Published Date: 06/01/2022

$24.9

ASTM F3125/F3125M-21

Published Date: 12/01/2021

$21.6

ASTM F3125/F3125M-19e2

Published Date: 12/01/2019

$21.6

ASTM F3125/F3125M-19e1

Published Date: 12/01/2019

$20.7

ASTM F3125/F3125M-19

Published Date: 12/01/2019

$20.1

ASTM F3125/F3125M-18

Published Date: 12/01/2018

$20.1

ASTM A325M-14

Published Date: 09/01/2014

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric) (Withdrawn 2016)

$18

ASTM F2280-14

Published Date: 09/01/2014

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016)

$17.4

ASTM A325-14

Published Date: 09/01/2014

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016)

$18

ASTM A490-14a

Published Date: 09/01/2014

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength (Withdrawn 2016)

$17.4

ASTM A490M-14a

Published Date: 09/01/2014

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric) (Withdrawn 2016)

$17.4

ASTM F1852-14

Published Date: 09/01/2014

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength (Withdrawn 2016)

$17.4

ASTM A490-14

Published Date: 08/01/2014

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$17.4

ASTM A490M-14

Published Date: 08/01/2014

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$17.4

ASTM A325M-13

Published Date: 02/15/2013

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)

$18

ASTM A490-12

Published Date: 04/01/2012

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-12

Published Date: 04/01/2012

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$18

ASTM F2280-12

Published Date: 03/16/2012

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$17.4

ASTM A490-11

Published Date: 12/15/2011

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-11

Published Date: 12/15/2011

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$18

ASTM F2280-11a

Published Date: 11/01/2011

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$15

ASTM F1852-11

Published Date: 11/01/2011

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM F2280-11

Published Date: 05/01/2011

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$17.4

ASTM A490-10ae1

Published Date: 12/01/2010

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490-10a

Published Date: 12/01/2010

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-10e1

Published Date: 12/01/2010

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$18

ASTM A490M-10

Published Date: 12/01/2010

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$18

ASTM A325-10e1

Published Date: 05/01/2010

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A325-10

Published Date: 05/01/2010

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-10

Published Date: 05/01/2010

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A325-09ae1

Published Date: 12/01/2009

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A325-09a

Published Date: 12/01/2009

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-09

Published Date: 11/01/2009

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-09a

Published Date: 11/01/2009

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$18

ASTM A490M-09

Published Date: 05/01/2009

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

$18

ASTM A325M-09

Published Date: 01/01/2009

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$15

ASTM A325-09

Published Date: 01/01/2009

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-08b

Published Date: 12/01/2008

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-08

Published Date: 12/01/2008

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

$18

ASTM F1852-08

Published Date: 12/01/2008

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM A325M-08

Published Date: 06/01/2008

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$18

ASTM A490-08a

Published Date: 01/15/2008

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM F2280-08e1

Published Date: 01/01/2008

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$17.4

ASTM F2280-08

Published Date: 01/01/2008

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$17.4

ASTM A490-08

Published Date: 01/01/2008

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A325M-07

Published Date: 12/01/2007

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$18

ASTM A325-07a

Published Date: 12/01/2007

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM F1852-07

Published Date: 12/01/2007

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM A325-07

Published Date: 09/15/2007

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A325-06

Published Date: 08/01/2006

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-06

Published Date: 08/01/2006

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM F2280-06

Published Date: 04/01/2006

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$17.4

ASTM A325M-05

Published Date: 12/01/2005

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$18

ASTM F1852-05

Published Date: 01/01/2005

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM A325M-04b

Published Date: 09/01/2004

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$18

ASTM A325-04b

Published Date: 09/01/2004

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A325M-04a

Published Date: 08/01/2004

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$18

ASTM A325-04a

Published Date: 08/01/2004

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-04a

Published Date: 08/01/2004

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-04a

Published Date: 08/01/2004

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

$18

ASTM F1852-04a

Published Date: 08/01/2004

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM A325M-04

Published Date: 01/01/2004

Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

$18

ASTM A325-04

Published Date: 01/01/2004

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-04

Published Date: 01/01/2004

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490M-04

Published Date: 01/01/2004

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

$18

ASTM F1852-04

Published Date: 01/01/2004

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM A490M-03

Published Date: 05/10/2003

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

$18

ASTM A325M-03

Published Date: 01/10/2003

Standard Specification for Structural Bolts, Steel, Heat Treated 830 Mpa Minimum Tensile Strength [Metric]

$18

ASTM F1852-02

Published Date: 12/10/2002

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$17.4

ASTM A325-02

Published Date: 01/10/2002

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A325-00

Published Date: 01/10/2002

Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18

ASTM A490-02

Published Date: 01/10/2002

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A490-00

Published Date: 01/10/2002

Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

$18

ASTM A325M-00

Published Date: 05/10/2000

Standard Specification for High-Strength Bolts for Structural Steel Joints [Metric]

$18

ASTM A490M-00

Published Date: 05/10/2000

Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints [Metric]

$18

ASTM F1852-00

Published Date: 05/10/2000

Standard Specification for "Twist Off" Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

$18.6

Related products

ASTM F1469-11

Published Date: 05/01/2011

Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing (Withdrawn 2018)

$18

ASTM F1470-24

Published Date: 01/01/2024

Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

$18.9

ASTM F1503-02(2012)

Published Date: 10/01/2012

Standard Practice for Machine/Process Capability Study Procedure (Withdrawn 2018)

$15

ASTM A449-14(2020)

Published Date: 12/01/2020

Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

$15.6

Best-Selling Products

IEC/TR 60034-16-2 Ed. 1.0 b:1991

Published Date: 02/15/1991

Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies

$88.746

IEC/TR 60068-3-12 Ed. 2.0 b:2014

Published Date: 10/17/2014

Environmental testing - Part 3-12: Supporting documentation and guidance - Method to evaluate a possible lead-free solder reflow temperature profile

$39.9

IEC/TR 60068-3-12 Ed. 3.0 en:2022

Published Date: 10/01/2022

Environmental testing - Part 3-12: Supporting documentation and guidance - Method to evaluate a possible lead-free solder reflow temperature profile

$83.4

IEC/TR 60068-3-15 Ed. 1.0 en:2024

Published Date: 02/01/2024

Environmental testing – Part 3-15: Supporting documentation and guidance – Vacuum-assisted reflow soldering

$70.2

IEC/TR 60068-3-82 Ed. 1.0 en:2024

Published Date: 08/01/2024

Environmental testing – Part 3-82: Supporting documentation and guidance – Confirmation of the performance of whisker test method

$115.8

IEC/TR 60071-4 Ed. 1.0 en:2004

Published Date: 06/23/2004

Insulation co-ordination - Part 4: Computational guide to insulation co-ordination and modelling of electrical networks

$136.5