NR NR/L2/OHS/CP0036 ISSUE 5 PDF

NR NR/L2/OHS/CP0036 ISSUE 5 PDF

Name:
NR NR/L2/OHS/CP0036 ISSUE 5 PDF

Published Date:
06/01/2024

Status:
[ Active ]

Description:

The Provision of Welfare Facilities for Temporary and Transient Work Activities (formerly NR/L3/INI/CP0036)

Publisher:
Network Rail

Document status:
Active

Format:
Electronic (PDF)

Delivery time:
10 minutes

Delivery time (for Russian version):
200 business days

SKU:

Choose Document Language:
$13.2
Need Help?
PDF ONLY

This standard specifies the minimum standards for the planning and provision of welfare facilities on all temporary sites of work where welfare is the responsibility of Network Rail, Principal Contractors or any contractors or suppliers employed by them. 

NOTE: Specific legislation might demand a higher standard of welfare facilities, e.g. working with asbestos or lead. 

Purpose 

The purpose of this standard is to provide the approach to the planning of suitable and sufficient sanitary and messing facilities for staff who are working away from permanent amenities (e.g. infrastructure maintenance depot). Compliance to this standard will provide: 

a) access to clean, properly maintained toilet, washing and messing facilities for all staff who are required to work away from permanent facilities; 

b) improved welfare and wellbeing of all staff through better planning and provision of welfare facilities, promoting inclusivity for a diverse workforce; 

c) compliance to legislative requirements, such as The Workplace (Health, Safety and Welfare) regs 1992, The Equality Act 2010 and application of good practice such as that provided through the Health & Safety Executive Approved Code of Practice and Guidance. 

This standard interprets the Construction (Design and Management) Regulations 2015 and other applicable Health and Safety legislation.


Edition : 5
File Size : 3 files , 1.5 MB
Number of Pages : 19
Published : 06/01/2024

History

NR NR/L2/OHS/CP0036 ISSUE 5
Published Date: 06/01/2024
The Provision of Welfare Facilities for Temporary and Transient Work Activities (formerly NR/L3/INI/CP0036)
$13.2
NR NR/L3/INI/CP0036 ISSUE 4
Published Date: 08/01/2008
The Provision of Welfare Facilities - This standard should only be used for reference to ensure 'The Control of Risk' until the compliance date of its replacement standard is reached, upon which this standard will be withdrawn. The development of all new processes and procedures should be to the replacement standard
$13.2
NR NR/L3/INI/CP0036 ISSUE 3
Published Date: 03/01/2008
The Provision of Welfare Facilities
$13.2

Related products

NR NR/CIV/SD/2158-4 ISSUE B
Published Date: 04/27/2012
Conarch Overbridge: Reinforcement Details 8.4m External Unit Setting Out Details - Skew 45°
$5.7
NR NR/L3/ELP/27240/NR/DIST C32A ISSUE 3
Published Date: 03/07/2020
Routine Maintenance of D.C. Track Feeder Switch (TFS) and TFS Remote Control Panel (RCP)
$13.2
NR NR/L3/OPS/045 ISSUE 28
Published Date: 07/01/2023
National Operating Procedures Index
$18.6
NR NR/L2/RMVP/0200/P507 ISSUE 2
Published Date: 06/03/2017
Infrastructure Plant Manual: On-Track Plant
$13.2

Best-Selling Products

IEC/TS 60034-16-2 Ed. 1.0 b:1991
Published Date: 02/15/1991
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Chapter 2: Models for power system studies
$33
IEC/TS 60034-16-3 Ed. 1.0 b:1996
Published Date: 02/14/1996
Rotating electrical machines - Part 16: Excitation systems for synchronous machines - Section 3: Dynamic performance
$43.5
IEC/TS 60034-17 Ed. 3.0 b:2002
Published Date: 03/26/2002
Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide
$18.3
IEC/TS 60034-17 Ed. 4.0 b:2006
Published Date: 05/09/2006
Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide
$47.1
IEC/TS 60034-18-32 Ed. 1.0 b:1995
Published Date: 03/29/1995
Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 32: Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV
$18.3
IEC/TS 60034-18-33 Ed. 1.0 b:1995
Published Date: 03/29/1995
Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 33: Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA a
$32.1