Name:
NR NR/L2/SIG/30009/A100 ISSUE 3 PDF

Published Date:
12/04/2021

Status:
[ Revised ]

Description:

Signalling Principles Handbook: Command and Control System; Control System and Interlocking Platforms; Definitions

Publisher:
Network Rail

Document status:

Active

Format:

Electronic (PDF)

Delivery time:

10 minutes

Delivery time (for Russian version):

200 business days

SKU:

PDF ONLY

The terms defined in this module apply to the implementation of signalling logic to implement required functional requirements, whether that is to be achieved in the interlocking itself, or at the trackside, or within the signaller’s control system or other related system.

The selection of relevant terms primarily reflects those with relevance to Multiple Aspect Signalling to which Track Circuit Block Regulations apply, controlled from a route setting panel or VDU system.

Purpose

This module forms part of the Signalling Principles Handbook (NR/L2/SIG/30009) and is to be read in conjunction with the other modules of the handbook. Its purpose is to provide a single document within which all definitions are stated, so that the various other modules of the handbook adopt consistent use of the terms.

Edition :	3
File Size :	1 file , 710 KB
Number of Pages :	55
Published :	12/04/2021

History

NR NR/L2/SIG/30009/A100 ISSUE 6

Published Date: 09/07/2024

Signalling Principles Handbook: Command and Control System; Control System and Interlocking Platforms; Definitions

$24.3

NR NR/L2/SIG/30009/A100 ISSUE 5

Published Date: 12/02/2023

Signalling Principles Handbook: Command and Control System; Control System and Interlocking Platforms; Definitions - This standard should only be used for reference to ensure 'The Control of Risk' until the compliance date of its replacement standard is reached, upon which this standard will be withdrawn. The development of all new processes and procedures should be to the replacement standard

$24.3

NR NR/L2/SIG/30009/A100 ISSUE 4

Published Date: 12/03/2022

Signalling Principles Handbook: Command and Control System; Control System and Interlocking Platforms; Definitions

$24.3

NR NR/L2/SIG/30009/A100 ISSUE 3

Published Date: 12/04/2021

Signalling Principles Handbook: Command and Control System; Control System and Interlocking Platforms; Definitions

$24.3

NR NR/L2/SIG/30009/A100 ISSUE 2

Published Date: 09/04/2021

Signalling Principles Handbook: Command and Control System; Control System and Interlocking Platforms; Definitions

$24.3

NR NR/L2/SIG/30009/A100 ISSUE 1

Published Date: 12/05/2020

Signalling Principles Handbook: Command and Control System; Control System and Interlocking Platforms - Definitions

$18.6

Related products

NR T60121 ISSUE 2

Published Date: 10/07/2005

Lineside & on Track Equipment Typical Circuits Indicators - Standard Route Indicator (F. O. 2 Indications) Acc: Relay Interface Location Case Circuit

$5.7

NR BR 1811 ISSUE 1

Published Date: 02/01/1990

Specification for a Serial Matrix Printer

$13.2

NR X04520 ISSUE 2

Published Date: 02/06/1999

AHBC Typical Circuits Signal Control Circuits Double Line Bi-Directional with Signal Regulation, Stop/Non-Stop Controls and Over-Run Call by Track Circuit Where Strike-in Allows M.R.O.T

$5.7

NR NR/L2/SIG/30014/D120/TS6-31 ISSUE 6

Published Date: 06/05/2021

Signalling Works Testing: Rail Clamp Point Lock (RCPL) Signalling Works Test Specification

$7.5

Best-Selling Products

VDI/DGQ 3441

Published Date: 03/01/1977

Statistical Testing of the Operational and Positional Accuracy of Machine Tools; Basis

VDI/DGQ 3442

Published Date: 03/01/1977

Statical examination of exactly working of turing machines

VDI/DGQ 3443

Published Date: 03/01/1977

Statistical examination of exactly working of milling machines

VDI/DGQ 3444

Published Date: 09/01/1978

Statistical control of exactly working and positioning of coordinate drilling machines and machining centers

VDI/DGQ 3445 Sheet 1

Published Date: 03/01/1977

Statistical examination of exactly working of grinding machines; fundamentels

VDI/DGQ 3445 Sheet 2

Published Date: 03/01/1977

Statistical examination of exactly working of grinding machines; external cylindrical grinding machines with center points; plunge-cut grinding operation