Name:
GMW GMW17862 PDF
Published Date:
09/01/2017
Status:
[ Revised ]
Publisher:
General Motors Worldwide
Material Description. Each hose type shall be defined by construction. The designation for the hose is defined as GMW17862 Type Y, where Y defines the construction of the hose per 3.2.1, and Table 1.
Construction Type A. Hoses are defined as consisting of a smoothbore tube of Nitrile Butadiene Rubber (NBR) copolymer compound and a cover of Chlorosulfonated Polyethylene (CSM) or Chlorinated Polyethylene (CM) compound. The hoses and/or hose assemblies are capable of giving satisfactory service at temperatures of -40 °C to the continuous temperature of +125 °C, and +150 °C excursion temperature.
Construction Type B. Hoses are defined as consisting of a single wall of Ethylene Acrylic Copolymer (AEM) compound. The hoses and/or hose assemblies are capable of giving satisfactory service at temperatures of -40 °C to the continuous temperature of+150 °C and +165 °C excursion temperature.
Construction Type C. Hoses are defined as consisting of a smoothbore tube of Ethylene Acrylic Copolymer (AEM) compound and a cover of fluorinated elastomers (FKM) compound. The hoses and/or hose assemblies are capable of giving satisfactory service at temperatures of -40 °C to the outer continuous temperature of +200 °C and +225 °C excursion temperature.
Symbols. Not applicable.
Applicability. Transmission venting hoses for under-the-hood applications.
| Edition : | 1 |
| File Size : | 1 file , 260 KB |
| Number of Pages : | 11 |
| Published : | 09/01/2017 |
